A pinata is made from a star.

A star is a good shape for a piataIt hangs well, is easy to fill with candy, and is simply designed to put together.

Step 1: There is a large star shape on cardboard.

The template will be used for shaping the wire.It should be large enough to hold the contents and hit the piata stick.It's good to have cereals and grocery boxes.As it will be covered, the look of the cardboard doesn't matter.

Step 2: Cut the cardboard in half.

The width should be the same.The sides of the star will be formed by them.

Step 3: Attach the strips around the star shape.

The strips should be upright.Attach the star base with tape.

Step 4: Continue until the whole star has a three-dimensional shape.

To join the strips, tape them all together.

Step 5: The star should be placed on a wide piece of newspaper.

Soon, this will cover the star.

Step 6: You can put goodies inside the star.

Small candies and toys are what these are.For hygiene reasons, candy must be wrapped.

Step 7: The star dents occur in the newspaper where Cut sits.

Wrap tape around the open edge of the star and put the newspaper around it.Make sure the newspaper is strong by repeating it.

Step 8: Cut 7.5 cm 3 inch wide strips from tissue paper.

If you prefer, use one color or vary the colors.

Step 9: Cut fringes from the paper.

The space between the slit and the fold is left by folding over the strips.Continue along each strip.

Step 10: The fringe of the star should be Glued to it.

Glue from the outside.First, glue the fringe around the outside of the star.Attach the fringe layer over the top of the last.Changing the color of the paper or foil for the inner layers would be of interest.

Step 11: The star's center should be free of fringe.

Cut a star out of a piece of cardboard.In a matching or different color, cover it with paper or foil.Glue to the center.If you wish, add the name of the party person.It's possible to decorate with stickers for something else.

Step 12: There is a fringe on the side of the star.

Lift up the fringe as you glue around the star to make sure it looks good.Continue adding fringe until you can no longer read the newspaper.

Step 13: Wrap a ribbon, twine or yarn around a star's pointers to make a hanger.

Tie in place firmly and leave a loop at the top for handing.

Step 14: The piata should be put down.

It is ready to hit.It is lightweight and easy to break open.

Related Posts:

  1. How to cut, shape, and glue EVA Foam - what is the best glue for it?
  2. There are 9 best glues for rhinestoness on fabric reviews.
  3. How To Make a Paper Tree for Kids
  4. How To Make Toys for Hamsters