Tables and chairs can be painted, but there are other things you can decorate with colors and designs.The refrigerator can also be painted.Whether you use a roller to avoid splatters and stains or spray paint for a much faster fix, revamping your refrigerator is easier than you might think.That midnight snack will be more tempting if the fridge is pretty.
Step 1: Move the fridge away from the wall and furniture.
To get to the sides and the top of the fridge, you need enough room.It protects the pieces from getting paint on them if it is moved away from the counter.Don't paint or clean a fridge while it's plugged in.It could cause injury.A friend can help you move the refrigerator.Take the food out of the refrigerator and freezer and put it in a cooler or backup fridge.The food will go bad if the refrigerator is unplugged.
Step 2: If possible, move the fridge to aventilated area.
Don't paint in a closed-in space because standard paint and spray paint give off dangerous fumes.In the backyard or on a deck is your best option.If you are spraying inside, open all of the windows and turn on the fans to help circulate the air.You will not be able to breathe in all of the fumes if you wear a mask.A friend or family member can help you move the fridge.If you're going to spray it, use a dolly to wheel it.
Step 3: If you are worried about drips, put a drop cloth under the fridge.
Painting can be messy, and you don't want to ruin your property.Drop cloth to protect against stains.Drop cloths can be purchased at a paint store.You can put out a tarp, trash bags, or an old sheet if you don't have a drop cloth.Don't try to lift the fridge.Lift one corner at a time by yourself and slide the drop cloth under you.
Step 4: With warm water and soap.
Dust and dirt on the outside of the fridge will mess up the paint and prevent it from going on smoothly.To clean the front, sides, and top, use a damp cloth or microfiber towel.The fridge should be air dry.It makes paint look bumpy if lint is left behind, so don't brush it with a towel.The crack between the door and the fridge is a good example of how to use an air compressor.This will remove food particles.If you don't have soap or want a natural alternative, a mixture of white vinegar and water will work.
Step 5: It's a good idea to sand the fridge.
There is a method to remove the gloss.This will help the paint adhere to the fridge.If you want to remove the varnish without damaging the refrigerator, use a 180-grit sandpaper.If your fridge is already painted, you don't need to take it off.You don't need to remove the glossy finish.If there is a lot of dust, you can wipe the refrigerator down with a damp cloth.
Step 6: If you don't want the areas painted with painter's tape, cover them.
The door handles, hinges, or rubber seals are included.Press the tape firmly around the spots you want to protect.To smooth down tape, use a spoon or fingernail.If you don't want to risk getting paint on the handles, you can remove them with a screwdriver or wrench.You won't lose them if you put them somewhere safe.
Step 7: The primer and paint should be applied directly to metal.
Seal and smooth the surface with a coat of primer.A two-in-one paint and primer can be used.It saves you from having to prime the fridge separately, and it also tends to be a thicker paint.It helps to avoid drips and splatters."smallUrl":"://www.wikihow.com/images/thumb/de/Paint-a- Refrigerator-Step-7.
Step 8: Put the paint in a tray.
Before using the paint, mix it with a wooden paint stick or spoon.The deep end of the paint tray needs to be filled.As you paint, refill the tray.You can cause drips in your coats if you don't stir the paint.
Step 9: Paint 3 thin coats with a foam roller.
Roll the paint onto the refrigerator using slow strokes.One super thick layer is more prone to chipping or dripping than multiple thin layers.Roll the roller in the paint tray.The paint goes on smoothly without streaks.It will take about 4 to 6 hours to paint each coat.You will ruin the previous coat if you don't let the paint dry completely before applying the next coat.The top of the fridge should be painted.It's best to start with the top so you don't smudge the sides.
Step 10: To paint hard-to-reach areas, use a small brush.
Even if you have a small roller, it won't be able to get around the handle or hinges.The edge of the door is perfect for painting with an angle brush.If you don't have an angle brush, you can use a small watercolor brush.
Step 11: Before plugging the fridge back in, let the paint dry for 24 hours.
If the paint is not completely dry, don't try to return the fridge to its original spot.You could get paint on a counter or piece of furniture if you mess up.If you don't know how long to let it dry, check the instructions on the paint can.To clean up mistakes like paint that got somewhere it wasn't supposed to, dip a cloth or Q-tip in rubbing alcohol.To remove paint, scrub the area.If you want protection after your paint is dry, roll on a layer of polycrylic sealant.Let the sealant dry for 72 hours after applying it with a foam roller.
Step 12: The entire surface should be covered with an oil-based spray primer.
The primer helps the spray paint stick to the fridge.To avoid spraying too much in one area, hold the can close to the fridge and move it back and forth constantly.Rust can be prevented with an oil-based primer.Before you start spraying, shake the primer can.
Step 13: The primer should be dry for at least an hour.
You can check the instructions on the can to see how long the drying time is.Depending on the manufacturer, it can range from 30 minutes to 3 hours.If you leave the primer to dry overnight, it will be completely dry before you start painting.
Step 14: Depending on the color scheme of your kitchen, choose 1 or 2 paint colors.
Since spray paint is hard to control in a small space, tiny patterns or multicolored designs are difficult to do.If you want your paint job to look professional, stick to a solid color or 2 contrasting colors.If your color scheme is navy, baby blue, and cream, you should paint the top and bottom half.White, black, gray, or chrome are neutrals that can be used for a subtler effect.eggshell and matt finishes show fingerprints and smudges.
Step 15: Let the paint dry completely by spraying it in thin coats.
Instead of spraying a thick coat, spray multiple lighter layers.It is best to keep the can away from the fridge, just like you did for the primer.Before applying the next coat, allow each coat to dry.Before spraying, shake the paint can for at least 1 minute.If you notice drips after a coat has dried, lightly sand it off with a piece of fine, 150 to 220 grit sandpaper.You should be able to apply a new coat with spray paint.If you want to avoid staining your hands while spraying, wear latex gloves.
Step 16: Before moving the fridge back, let the paint dry for 24 hours.
You could smudge or chip the paint if you try to take the fridge back inside.It will dry out in a warm spot.It takes longer for paint to dry.If you want to prolong the life of your paint, you can spray a protective sealant over it.Let it dry for at least 72 hours after applying 1 coat of sealant.It is possible to prevent the refrigerator from rusting.