Playing a reed instrument such as a saxophone is dirty because the mouth is full of germs and food particles.mold can cause illness if a saxophone is not cleaned.Your saxophone can sound great for a long time with a little care.
Step 1: The saxophone needs to be reassembled.
Remove the saxophone's neck, its reed, and the ligature.Since they come in contact with your mouth, you will want to clean them often.The part of the mouth that makes the sound vibrate is the reed.
Step 2: Remove the reed.
The saliva in the warm air provides a moist place for growth of organisms as well as food particles that damage the instrument.A clean reed often requires a wipe down with a dry towel or specialized swab after use.It will stop chemicals from congealing.Music stores and online have specialized saxophone cleaning brushes.
Step 3: The reed has to be deep cleaned.
A wipe won't remove the water.A more thorough cleaning is recommended to kill germs.For 30 minutes, soak the reed in a cup of warm water and two caps of vinegar.After that, rinse the reed with warm water.
Step 4: To dry the reed in the open air, choose a clean spot.
bacteria can be reintroduced when the saxophone case is sealed.It should be placed on a paper towel.Remove the paper towel and flip the reed.Store it in a reed bag once it is completely dry.
Step 5: It is advisable to treat the mouth.
If the saxophone is used daily, it's a good idea to remove the head and start treatment once a month or weekly.Limescale is a substance that affects the sound and can be difficult to remove.
Step 6: The acid should be applied.
The removal of limescale can be done with an acidic substance such as hydrogen peroxide.If you can, you may want to brush off the limescale by hand.The cotton should be soaked with a vinegar of 4% acidity.The first rest should be on the window.Rub off the limescale with the second after ten minutes.Tough cases should be repeated a second time.If you have hydrogen peroxide, submerge it for two hours.The limescale will be dissolved by the chemical.
Step 7: Put soap and water in the mouthpiece.
Hot water and detergents damage the instrument.You can still get at the limescale if you use a gentle detergent and warm water.
Step 8: The limescale needs to be brush away.
This can be done with a small toothbrush.The mouth can be pulled with a string.The more thorough cleaning is recommended.
Step 9: Germicide should be soaked in the mouthpiece.
Even though stersol is readily available for use on instruments, it is still a good idea to bathe the mouthguard for a few minutes.This step is useful in eliminating leftoverbacteria.
Step 10: There is a clean spot in the open air.
This will prevent the mouth from getting wet.Store it in the saxophone case once the humidity is gone.
Step 11: You can run a sample through after using it.
The build up is collected in the neck.Pull the swab through the neck on the string after putting it in the bell.
Step 12: The limescale needs to be removed.
Warm water, soap or detergent, and a bottlebrush or toothbrush are required for this process to be used weekly.Use the soapy water to attack the limescale by dipping the brush into it.Under the faucet, rinse out the rest.
Step 13: Make sure the neck is sterile.
Again, this is optional, as the soap and water takes care of thebacteria well enough.Any leftover odors can be finished with certainty here.The germicide should be put into the neck to coat the inside.Let it dry in a clean place on a paper towel, then rinse it under water.Either dry it by hand or let it air dry.It can be used here as well.The limescale should be loosened with soap, water, and brushing.Place the neck upright, then add either cold or warm vinegar.After 30 minutes, rinse the vinegar with soap and warm water and then dry it by hand.