The build up ofbacteria can be prevented by periodic cleaning of toilet tanks.Light scrubbing and commercial cleaners can be used to clean the tanks.It is possible that bleach is necessary for very dirty tanks.It's important to clean your tank to keep it clean.
Step 1: The tank needs to be emptied.
The water should be turned off to drain the tank.There is a valve near the wall.After the water is turned off, flush your toilet.The water should be drained from the tank.
Step 2: The proper type of cleaner is determined.
You should look at how dirty your tank is.It's all you need if it seems clean.The same spray can be used in your bathroom.You need something stronger when there is built up debris.If you see deposits of minerals in the tank, you should use white vinegar.If there is a lot of gunk in the tank, use bleach to clean it.
Step 3: Your cleaner should be applied.
You can spray or pour the cleaners into the tank with bleach and commercial cleaners.Pay particular attention to areas with built up dirt at the bottom and sides of the tank.Gloves are required when handling bleach.
Step 4: The mineral deposits should be treated with vinegar.
The process for dealing with mineral deposits is slightly different.Up to the top of the overflow tube, pour white vinegar.Before you flush the toilet, let the vinegar sit for 12 hours.After 12 hours have passed, flush the toilet.
Step 5: Put gloves on your face.
There are a lot of bugs in the toilets and bathroom.Put on gloves to clean your toilet tank.You can protect yourself from germs with rubber gloves.Gloves protect your skin from the harmful effects of bleach.
Step 6: Your cleaner can sit in the tank.
Leave your cleaner in the tank for a while.For 10 to 15 minutes, most cleaners should be left on.It's always a good idea to check the directions for your cleaner.After 12 hours, you should clean the tank.
Step 7: Put your cleaner into the tank.
To clean your tank, use a scrub brush, toothbrush, or sponge.If you want the toilet bowl to smell fresh, you need to scrub down the sides and bottom of the tank.The working parts of the tank should be cleaned as well.
Step 8: Take out the tank.
You can turn on the water and flush the tank once you've scrubbed it down.If you've used bleach, add a gallon of cold water to the tank and flush it.If you add water to a tank with bleach in it, you may want to wear goggles to protect your eyes.
Step 9: Occasionally, remove mineral deposits.
Mineral deposits will eventually build up in a toilet tank.If you notice deposits in your tank, you should treat it with white vinegar.Let the tank sit for 12 hours, then flush and clean it.
Step 10: Don't use tank tablets if you want to be careful.
Tank tablets are meant to be placed in your tank to help it smell fresh.Don't use tablets that contain bleach.The inside of your tank can be damaged by these.Tablets are probably not necessary if you clean your toilet tank regularly.
Step 11: A cleaning routine is needed.
Many people forget to clean their toilet.Don't fall into this trap.Give your toilet tank a good cleaning at least once a month.It will keep your bathroom smelling great.