Learning the basics of torch welding is the first step in becoming proficient with many types of weldingBecause of the many nuances involved with maneuvering the torch, mastering welding is something that can take time.There are many types of materials that can be welded, each with its own unique properties.You will be able to apply the process to a variety of projects once you have mastered the oxygen flow and tip size on a torch.Use the tips to learn how to torch weld.
Step 1: Long pants and shirt, welder's gloves and eye protection are required.
Step 2: Work in an open space that is free of dangerous materials.
Step 3: Go to the fuel adjustment knob.
The shorter of the 2 tanks on the torch has a knob on it.To release the gas, turn the knob slowly.
Step 4: The torch needs to be lit.
Slowly light the torch if the fuel is trapped in the spark cup.
Step 5: The flame should be adjusted.
Once you have the size flame you need, open the oxygen valve a little bit at a time.Blue edges will be defined by a steady flame.
Step 6: The material needs to be cleaned before it's welded.
Check the material you are welding for.If you want the material to be free of dirt or debris, you have to clean it.
Step 7: The flame needs to be applied to the weld.
Carefully move the torch over the area to be welded after adjusting your flame.If you want to see your results, move at an even pace.You will create holes in the material if you hold the flame too long.The piece will not melt if there is not enough application.Move your torch in short runs to make sure you get the result you need.Pay attention to the angle of the torch and the amount of flame.