If you're asking the difference between cat5 and cat5e, the difference is speed of data transfer; 5e being faster than 5. If you're asking if both can be plugged into a RJ45 jack, the answer is yes as the jack is the same used for all ethernet connections.
Are all Cat5 connectors the same?
The connectors (technically called “8P8C”) are the same for Cat5, Cat5e, Cat6, Cat6a, and Cat7. The cables themselves differ in frequency, shielding, cross-talk, and their consequent maximum signaling rate, but their pinouts are all compatible with an 8P8C/RJ-45 connector, and the jacket colors should also be similar.
Are Cat6 and Cat5e connectors the same?
The connectors for Ethernet copper wires are called RJ45, Cat. 5e or Cat. 6 is the standard for the cable in between. Ans yes, both Categories are using the same connector type (i.e. RJ45), with the same wire layout but slightly different details regarding wire twists etc.
What type of connector would you use on a Cat5 cable?
RJ45 connectors
What do you call a connector for CAT5e cable?
The term RJ45 connector is widely used today to describe both male RJ45 plugs and female RJ45 sockets. The plugs, sometimes called modular connectors, are usually found on the end of Ethernet cables.
Do Cat5 and Cat6 use same connectors?
They can be plugged in to the same ports. Therefore, Cat6 cable works on Cat5 Network. However, Cat5 cable can't be used on Cat6 network since Cat6 network has more requirements on cabling performances and capabilities, which Cat5 cable can not reach.
Can I use Cat6 Jack with Cat5e cable?
Yes. Cat6 and Cat5e are just designations for rated quality/speed of the cable. Cat6 provides “… lower crosstalk, higher signal-to-noise ratio…” when compared to Cat5e other specs below that level. Cat6 is backwards compatible with Cat5e.4 May 2019
What is the connector for Cat5e cable?
There are two common Cat5e cable wiring schemes, 568A and 568B, that are used with an 8-position connector like an RJ45. The A and B standards are similar, and both Cat5e wiring schemes establish a connection for reliable Ethernet applications.
What type of connector is used with Cat5e and Cat6 cables?
CAT5, CAT5e and CAT6 share a few common requirements. Among those things are the RJ45 connectors (clear plastic male plugs as well as the female jacks). The connectors are used for backwards compatibility. With the use of RJ45 connectors we are then forced to use the familiar 4-pair signal wire.