To have the door function properly, you will have to make sure that the door knob you buy is the correct size for your door. The standard size for a door knob diameter is either 2 3/8 inches or 2 3/4 inches and these knobs will usually fit doors that are anywhere between 1 3/8 inches to 1 3/4 inches thick.
What is the standard door knob diameter?
2 3/8 inches
How do you know what size door knob to get?
Measure the bore hole. You'll need to know the bore hole's diameter to get the right sized knob. Measure across the circular hole at its widest point, i.e. start at the bottom of the hole and pull the tape until you hit the top of the hole. There's your diameter.
What is the standard door lock hole size?
The standard sized bore hole is 2 1/8" in diameter. Through the edge of the door there is a 1" cross bore that extends from the edge of the door through the bore hole. This cross bore is where the latch is installed. In addition to the two cross bores, a door can be prepped for one of 3 different types of latches.
What is the diameter of a standard door knob?
2 3/8 inches
Are all door knob holes the same size?
Replacement hardware needs to fit your door, and hardware for a new door requires a hole saw in the correct size. Typically, deadbolts need a bore hole 1 1/2 or 2 1/8 inches in diameter. ... The most common are 2 3/8 inches and 2 3/4 inches, but some hardware can fit multiple backsets.