In effect since July 2012, the legislation eliminates nearly all 4-foot T12 lamps, some 4-foot T8 lamps, most 8-foot T12 lamps, and almost all standard halogen PAR38, PAR30 and PAR20 lamps from the market. T12 technology is over 80 years old. Since that time, lamps and bulbs have been developed that just work better.
Are fluorescent tube lights being phased out?
US Department of Energy (DOE) regulations began phasing out various sizes of commercial fluorescent light bulbs in 2012. About all you can get today is the fluorescent workhorse of commercial lighting—the T81 bulb. By even T8s will be banned to align with new DOE energy efficiency standards.Nov 7, 2016
Can I replace a T12 with LED?
Can you actually retrofit T12 to LED without changing out the ballast? Actually, yes. This product is unique because it is compatible with both the magnetic ballast found in most T12 fixtures and electronic ballasts that you would need to use when the old ballast finally fails.
Which is better T8 or T12 bulbs?
The smaller the lamps the more energy efficient they are. T8 bulbs use about 35% less electricity to produce the same amount of light as a T12. For some applications, one T5 bulb can replace two T12 bulbs, providing even greater energy savings (a process called “de-lamping.”)Oct 9, 2015
How do I convert a T12 ballast to LED?
- Install ballast-bypass linear LED lamps.
- Install plug-and-play magnetic and electronic ballast-compatible linear LEDs.
- Install electronic ballast-compatible linear LEDs and a new electronic ballast.
Can I use T8 in place of T12?
T8 tubes are simply 1 inch in diameter versus the 1.5 inch diameter of T12 tubes. In an effort to make LED tube lights compatible with the internal dimensions of most fixtures, you will find that most LED tube lights feature a T8 or 1 inch diameter. They can indeed be used in T12 fixtures.
Is it worth replacing fluorescent tubes with LED?
You could save a lot of money on energy by replacing your fluorescent bulbs with LEDs. They keep cooling costs down - You also may be able to trim down your cooling expenses as well. Fluorescent lights don't generally produce a lot of heat, at least not as much as HID lamps, but they do burn hotter than LEDs.
Is it worth replacing bulbs with LED?
LEDs use much less energy than incandescent bulbs because diode light is much more efficient, power-wise, than filament light. LED bulbs use more than 75% less energy than incandescent lighting. Another advantage of LEDs is the “hassle factor.” LEDs last a lot longer than a regular bulb.
Why are fluorescent lights being phased out?
But as soon as the phase out was announced, production began to decline. It was a combination of the impending restrictions, increased energy efficiency awareness, and emerging rebate programs targeting those with traditional T12 fluorescent tubes.
Can you replace T12 with T8 LED?
Direct-wire compatible T8 LED tube lights can be used in a T12 fixture, as long as the T12 ballast is either bypassed, or completely removed.
How do you wire a single pin LED tube light?
https://www.youtube.com/watch?v=mVDvXOsrY6U
Do I need to remove the ballast to use an LED bulb?
A plug and play LED is a fixture where you can install LED bulbs to what was once a fluorescent bulb. This is an easy solution and requires minimal effort on your part. Since it works with the existing ballast, there is no need for rewiring or ballast removal.
Can a ballast compatible LED be used without a ballast?
If the LED tube is not compatible with your ballast, you would then need to replace your ballast in addition to the T8 LED tube. The T8 LED tube won't work without the ballast, so you are forced to continue buying and replacing ballasts as long as you have an LED tube that is ONLY ballast dependent.
Do I need to change fluorescent ballast when changing to LED fluorescent lights?
All you need to do is remove the existing T8 fluorescent lamp and install a new T8 LED Type A lamp. However, using an existing ballast is not as efficient as the methods further below as their lifespan is affected due to the ballast needing to be replaced before the LED itself.
How do I convert T12 to T8?
https://www.youtube.com/watch?v=itySTNrCE_8
Can you replace normal bulbs with LED?
Yes, in many cases, you can simply replace your bulbs separately, one by one. Replacing your existing incandescent or halogen bulbs with durable LED bulbs offers numerous benefits. You enjoy an even better light performance and benefit from very low energy consumption.
Do they make fluorescent lights anymore?
While the discontinued products may no longer be manufactured, they can still be sold until existing supplies are gone. In the meantime, consumers are likely to pay a premium for the lamps themselves, but also more in utility costs because these technologies use more energy.
What's brighter T12 or T8?
The Standard T12 lamp produces 2,650 initial lumens per lamp. The standard T8 produces 2,800 initial lumens per lamp, 6% brighter. But the standard T12 lamp produces 2,300 design lumens and the T8 produces 2,660 design lumens.Feb 1, 2010
Can I replace a T12 fluorescent light tube with an LED tube?
T8 LED tubes won't fall out if you try to install them in a T12 fixture—they'll fit just fine. But here's some even better news: If you have a T12 fixture, conversion to LED is going to be even easier than with a T8 fixture. This is because T12 fixtures have non-shunted tombstones, exactly what you need for LED tubes.