No you cannot. XLR inputs are for low level low impedance signals while the TRS or TS jack is typically used for line level (hot) signals from an instrument or preamp with a higher impedance 600ohms-15k ohms depending on the source impedance. Depends on how the TRS connector is wired.
Can you use XLR to TRS for microphone?
The type of cable used to carry an audio signal has no effect on the level of that signal. You can apply mic/instrument level signals to 1/4" TS, 1/4" TRS, or XLR cables and connectors. You can also apply line level signals to 1/4" TS, 1/4" TRS, or XLR cables and connectors.
Are XLR and TRS the same?
TRS: What's The Difference? XLR connectors are used to transmit mainly balanced mono audio but sometimes stereo signals, from one device to another, whereas TRS connectors are used for headphones and unbalanced stereo connections.Oct 8, 2021
How do I connect TRS to XLR?
https://www.youtube.com/watch?v=N9B0ukC5MKk
Can you use XLR cable for TRS?
TRS Can Be Connected to Inputs and Outputs When using an XLR cable, you're usually going to be sending a signal one direction. For example, an XLR cable is usually used to send a signal from a microphone to a mixer. With a TRS connection, audio can be sent both ways.
How do I connect TRS to audio interface?
https://www.youtube.com/watch?v=DSjeLsPj-Lc
Does XLR sound better than TRS?
There is no noticeable difference in sound quality between XLR and 1/4 inch TRS connectors and cables. They are both balanced and can deliver a stereo audio signal. However, XLR is a better option compared to 1/4 inch TS cables.
What is XLR to TRS for?
This Balanced XLR Cable is designed to convert a balanced 1/4" TRS output to a balanced XLR input. These cables are commonly used as speaker leads for active speakers, carrying the audio signal from the mixer to the speaker. They are also widely used as signal cables for stage and studio audio applications.
Are TRS to XLR cables balanced?
XLR to TRS Cable The secret lies in the cable's balanced construction. A balanced cable, such as an XLR to TRS cable, contains three conductors to pass audio — a positive, a negative, and a ground.
Can you go from TRS to XLR?
The Cable Matters 1/4 Inch TRS to XLR Cable is the ideal solution for connecting audio equipment with the common 1/4" TRS connector and XLR connector. Sturdy metal connectors have gold-plated contacts to reduce oxidation and strain-relief molding on the XLR connector to maintain cable integrity.
Are TRS connectors balanced?
TRS cables have three contact points: tip (T), ring (R), and sleeve (S). That extra contact point makes a big difference because it enables a balanced audio signal. That's why these are also called “balanced cables” or “balanced TRS”.
Are TRS cables balanced or unbalanced?
A quarter-inch TRS cable is another balanced professional audio cable. TRS stands for tip, ring, sleeve, and can be used to send either mono (balanced) or stereo (unbalanced) signals.