It is easy to make bangles from plastic bottles.You can make lots of bangles that match different outfits by decorating them in many different ways.Re-purpose those plastic bottles into something fashionable.
Step 1: Remove the drink bottle.
Before making the bangles, allow the bottle to dry.
Step 2: Measure the bangle's width.
Along with what the bangle needs to hold by way of decoration, this will be determined by your preference.
Step 3: The width of the bottle should be taped off.
It will be easier to remove masking tape than stronger tape.
Step 4: Cut out the bangle shape from the bottle with scissors or a craft knife.
Work slowly and carefully.If you don't feel comfortable cutting something for yourself, ask someone who is willing to do it for you.
Step 5: If necessary, Sand down the edges.
If the edges seem a little rough, use an emery board to make them smooth again.
Step 6: Cut the plastic bangles you want from the bottle.
If you're making gifts for friends, it's a good idea to make lots of basic bangles.
Step 7: You can choose duct tape.
Do you have a favorite color or pattern of duct tape?The choice is yours to make.
Step 8: Cut a piece of duct tape.
Wrap the tape around the bangle to make sure the join is on the inside.
Step 9: A thin strip of duct tape can be cut.
Run it around the inside join so that it won't bother you when you wear it.
Step 10: If you want, add decorative elements.
You should draw up the design before you cut, arrange and glue the decorative pieces.It is possible to glue on a piece of leather in a line, zigzag formation or as a series of designs.Costume jewels, beads, and other pretty objects can be added to the bangle.Add some ribbon for a final touch.
Step 11: It was done.
The bangle is ready to wear.
Step 12: To fit around the bangle, cut a length of foil tape.
Allow a small overlap as well as the bangle's size to allow you to wrap it around the outer side.
Step 13: Wrap both sides of the bangle with foil tape.
The join should be in the middle of the bangle.The beads will cover this join.
Step 14: Cut the tape in half.
If you want to see the foil tape on either side of the bangle, the width should be less than it is.
Step 15: Wrap the tape around the bangle's outside edge.
It's important to cover the join from foil tape.When you're ready to add the micro beads, leave the upper backing on the double-sided tape.
Step 16: Attach the beads to the container.
The place for you to roll the bangle will be provided by this.
Step 17: The double-sided tape has backing on it.
Roll the bangle slowly in the container of beads, pressing gently to pick up the micro beads on the double sided tape.As you do this, hold the bangle by the edges.
Step 18: The sealant should be brushed over the micro beads.
This will keep them in place.When you press more micro beads into place, use the sealant to keep them intact.
Step 19: Allow it to dry.
The areas which seem to be missing micro beads should be adjusted using the sealant.
Step 20: To dry, lay on wax paper or a silicone sheet.
Fix loose beads when they are dry.
Step 21: Finished.
The bangle is ready to wear.
Step 22: Pick the fabric.
Don't hold back, this can be from almost any source.It's possible to make bangles that match your entire wardrobe.Old house linen Handkerchiefs are one of the sources of fabric.
Step 23: Cut the fabric into strips.
Step 24: You can choose your method of application.
You can either wrap the fabric around and around the bangle, creating neat overlap lines, or you can glue the entire bangle into the middle.Glue the starting end, then every few wraps of the fabric with the first way.Roll glue over the bangle first, then glue at the join of the fabric.Attach the join with a length of ribbon or scrap fabric.
Step 25: If you like decorative elements, add them.
You don't need to do this if the fabric looks great on its own.Glue or sew on beads, buttons, jewelry pieces, feathers, etc.
Step 26: Done.
The bangle is ready to wear.
Step 27: You can choose a color of foil paper.
Pick a color to match the outfit.
Step 28: Take the paper foil and measure it.
Measure the bangle's circumference along with a small allowance extra for wrapping around the inner side.
Step 29: The foil should be cut.
Follow the measurement you made.
Step 30: Wrap the bangle around your wrist.
Wrap the foil paper piece around the outside of the bangle.
Step 31: Attach the foil paper from the inside.
To keep the foil paper from unraveling, glue it in place.To cover the foil paper join, glue a length of thin ribbon.
Step 32: Mod Podge can be applied to the foil paper.
It will be better to prevent it from being ripped.Allow the bangle to dry before you wear it.
Step 33: It was done.
The bangle is ready to wear.