Black rim can have a more delicate finish.It's possible to use a cleaning solution that doesn't need water.Alternatively, you can use one that does not require water.It's your decision.If your wheels are dirty, the waterless method may be better.Once the wheels are clean, apply a wax finish.
Step 1: Find a waterless cleaner.
There are a number of waterless cleaners on the market.It is easy to detail your black wheels with the help of these cleaners.You will need microfiber cloths throughout the process.Chemical Guys Waterless Carwash and Wax has a bottle that says "waterless" on it.Black microfiber cloths are edgeless.They are edgeless and less likely to scratch your rim.Any kind of rim can be cleaned with waterless cleaners.Make sure it is safe for the type of finish you have, which is most likely a painted aluminum alloy.You don't want to use anything that is harder than your car's finish.
Step 2: The rim needs to be sprayed.
As you clean the rim, you need to cover it with the cleaner.It's a good idea to spray it down.It doesn't need to be dripping off, but the whole surface of the rim needs to have a cleaner on it so it can break down gunk.
Step 3: It's best to rub it down.
Rub the rim with the microfiber cloth.It's important to get all the dirt out of the nooks and crannies.Rub both the spokes and the inside edges of the wheels as they can get dirty from road debris and brake dust.
Step 4: A rim-specific cleaner is recommended.
You should use a cleaner that is designed for cleaning.Pick one that says it can be used on the finish you have.If you have painted aluminum alloy, make sure it is safe.You need to spray the wheel with water or wipe it down if you want this type of cleaner."waterless" won't be said.
Step 5: It was wet down.
Follow the directions for the cleaner you use.You spray down the wheel before applying a rim cleaner.skip this step if the directions say not to.
Step 6: The solution must be applied.
All you need to do is spray the cleaner.You may need to apply water with a sponge or brush for others.Follow the directions on the bottle.
Step 7: The wheel needs to be brushed.
Use a brush to clean.Make sure the brush you use is appropriate for that finish.You don't want anything abrasive with aluminum alloy.Make sure you get in all the crevices as you move around the rim.
Step 8: The rim needs to be cleaned.
You should rinse the solution off after you've cleaned the rim.A hose can be used for this purpose.It can be difficult to apply the wax if you don't get all the soap off.A sopping sponge can be used to get the dirt off.The sponge can be used to get into the crevices.
Step 9: The wheels need to be dry.
Make sure to dry the wheels with a dry towel or rag after washing and rinsing them.If you pick up any grease left on the rim, it won't stick to the microfiber cloth in the next stage.
Step 10: There is a finish that you can choose.
Final Finish is usually where you'll spray on a spray wax.The finish has wax, but it also has other Additives.The finish stays on the wheels for longer with the help of the Additives.You can use rub-on wax.To keep the wax from leaving white streaks on your black wheels, consider using a black wax.If your wheels are painted clear, you can use a black wax similar to what you would use on your car.If your rims are glossy, you should only use a black wax.
Step 11: The wax needs to be applied.
If you're using a spray-on wax, be sure to use a piece of cardboard or paper to protect the brake pad from the wax.Rub the wax in with a clean microfiber cloth.If you want to get both kinds of wax, make sure you put it on first, as well as in all the crevices.To make it shiny, buff out the microfiber cloth with a clean side.If you're using black spreadable wax on glossy wheels, try to avoid getting it in the crevices.Make sure to get a solid coat by using an applicator sponge to rub it gently over the wheel.