The exposed wood floors and furniture are easy to stain.Untreated wood has a higher chance of getting deeper stains because it doesn't have the protection wood with finish has.There are methods that can remove blood stains from wood.
Step 1: Baking soda should be placed on the blood stain.
Step 2: The brush should be washed in white vinegar.
Step 3: You can gently rub the stained area with the brush.
Step 4: The affected area should be wiped thoroughly with a dry clean cloth.
Use bleach if the stain is still visible.If you have dark wood, use bleach cautiously.
Step 5: Remove the brush from the stained area by washing it in bleach.
Step 6: Use a damp cloth to clean the area.
Step 7: Dry the wood with a towel or cloth.
Step 8: You can use a clean cloth to clean the blood.
Step 9: To make a detergent solution, mix 1/2 of liquid dish- washing detergent with 1 cup of cold water in a small bowl.
Step 10: The detergent solution should be put in a clean cloth.
Step 11: To remove the remaining blood stain, wipe the area with a cloth.
Step 12: Use a damp cloth to rinse the area.
Step 13: The wood can be dried using a towel or cloth.
The blood stain can still be seen.
Step 14: If the stain is still visible, you can dip the steel wool in liquid wax.
Step 15: The stained area should be lightly Rub with steel wool.
The steel wool should only be used to remove the fine layer of wood.
Step 16: A soft cloth can be used to wipe the surface clean.
Step 17: If needed, wax orpolish the surface.
Step 18: Use a damp sponge to wipe the blood.
Step 19: The sponge must be washed.
When all the blood is gone, repeat the wiping process.
Step 20: To remove blood stains, rinse the area thoroughly with a damp cloth.
Step 21: The wood needs to be dried using a towel or cloth.
Step 22: The affected area should be buff with a cloth.
This should be done lightly.
Step 23: To clean the area, use a wet cloth.
If the blood stain is not gone, use a steel wool.
Step 24: Rub the stained area with a steel wool moistened with mineral spirits
Rub along the grain of the wood.You have to remove as much finish as you can.
Step 25: Place a soft cloth on the surface.
Step 26: If necessary,finish the area after 24 hours.