Bob Vila has the best saw blade for cutting Laminate flooring.
If you purchase a product through one of our links, BobVila.com and its partners may earn a commission.
It's great to complete a flooring project with your own skill and expertise, but if you don't have the right saw blade, you can end up spending a lot of money on repairs.A protective wear layer that is infused with aluminum oxide chips can rapidly wear down a cutting blade.These chips are used to make tough, coarse sandpaper.
It is important to find a product with a thin blade width in order to get a clean cut.The best saw blade for cutting laminate flooring should have a diamond tip to help it move through the rough material.Take a look at the products below and consider features when shopping for the best saw blade for cutting laminate flooring.
It is important to have the right saw blade for clean cuts and to prevent chipping when removing an old floor or installing a new one.Before you buy a new saw blade, make sure it is compatible with your current saw and the blade's diameter, arbor size, and number of teeth are all taken into account.
There are several different types of saws that work with laminate flooring.Each of these tools has a unique saw blade design, except for the circular and miter saws, which use a round cutting disc.
It is important to check the compatibility of the saw with the blade before committing to a project.If the blades have a smaller or larger arbor hole that prevents them from fitting securely in the saw, a set of laminate blades won't work.
It is possible to interchange saw blades.Before using a blade on a different tool, be certain that it has been designed for this purpose.If the blade doesn't fit properly, it could break and be thrown into the workshop or garage.Make sure the blade is the right size, fits securely on the saw, and that it is safe to use with the current tool.
Round disc cutting blades used on circular saws need to be the right size to fit, even though blade diameter is not a consideration for jigsaw blades.There is a wide range of sizes for circular saw blades.Larger blades can be used for longer cuts, and smaller blades for more precision, in lieu of using 10-inch or 12-inch blades.
The blade thickness is another consideration.When working with laminate, look for a thin kerf.Large chips in the material that are difficult to hide can be created by wide blades pulling at the sides of the laminate.
At least four teeth are needed to cut through the target material.A low number of teeth on the diamond-tipped blades make them less effective at cutting cement.The saw blades used for laminate will have up to 100 teeth.
The higher the number of teeth, the cleaner the cut, but these blades also put more strain on the tool's motor because there are more friction points to slow the rotation of the blade.If you want to rip through old laminate flooring, blades with fewer teeth are a great option.
The arbor is a shaft that protrudes from the tool's assembly to support the saw blades at their center.The arbor hole is in the middle of the blade.The hole must match the size of the saw's arbor or the blade will either not fit or be too loose to be effective.
It is important to know the standard arbor size for the most common blade diameter.
The products below were chosen using a number of criteria, including the price and overall quality.Check the list to find the best saw blade.
The hardened steel used in the A-93681 miter saw blade will resist bending or warping even after extensive use.The saw blade is 10 inches in diameter and features an incredibly thin kerf that is only.091 inches thick, allowing the blade to cut through flooring materials with little resistance or strain on the saw's motor.
The saw blade has 80 teeth that have a slight angle to help it last longer.There are five laser-cut heat expansion slots.When a saw blade heats up, it expands and can become warped and inaccurate, but the expansion slots give the metal a gap into which it can expand so that the cut remains straight.The arbor is 58-inch.
The small 538-inch diameter of the Concord blade is ideal for making precision cuts with a circular saw because it doesn't cause as much resistance as a larger blade.The saw can be better controlled by the user.This saw blade has 40 teeth, which might seem like a low number, but this is just because the blade is half the diameter of a standard 10-inch circular sawblade.
The blade is designed for cutting through strong materials like laminate flooring, hardwood, and engineered wood flooring.The thin kerf and lower hook angle on the teeth allow the blade to cut through laminates without a lot of waste.It can increase the amount of pressure needed to cut through the flooring.The arbor is 58-inch.
The Bosch T503 saw blades are used for hardwood and laminate flooring projects.The set comes with two hardwood blades and one laminate blade that is 314 inches long.The hardwood blades have 35 teeth and a piercing tip, while the laminate blade has 40 teeth that cut smoothly through high-pressure laminates.
The jigsaw blades have an aggressive tooth pattern that cuts through tough material like deck boards.The blades are better suited for making curved cuts or small precision cuts in larger flooring projects.
Having a cheap saw blade break just a few cuts away from completion is one of the most frustrating parts of a do it yourself project.The Freud D12100X circular saw blade costs more than a bargain, but it will last longer.The Parma-Shield coating protects the blade from heat, gumming, and corroding.
The saw blade has 100 teeth for a smooth cut and a 1-inch arbor hole, which is standard for 12-inch blades.While the saw is in use, a thin kerf and a set of stabilizer vents are supposed to reduce vibration.The blade is better able to deal with hardware that is shock resistant because of the carbide-tipped teeth.
The arbor hole on the Freud 10-inch miter saw blade can fit most circular saws.The thin kerf helps create a clean cut without a lot of waste, and the laser-cut blade has anti-vibration slots that can reduce the vibration through the blade and prevent it from jumping or shifting while cutting.It has 80 teeth and is 10 inches in diameter.
The blade has heat expansion slots and a coating that protects the teeth from heat and gumming.The teeth have a high alternate top design made up of many small teeth that face in alternating directions for a cut that is free of splinters and chipping.
The Bosch DCB1080 Daredevil 10-inch blade is designed for working with laminates.The saw blade has four expansion slots and an extra-thin kerf for faster cuts.The blade is made with hard, durable steel that resists bending and warping so that it remains accurate over its entire life.
The Bosch blade has 80 teeth that resist impact and abrasion and help it remain sharp for a longer time.There is less risk of chipping because the saw blade has a negative hook design that doesn't tear at the side of the laminate.
If you want to punch into the center of a piece of flooring, you should use the T128BHM3 jigsaw blades, each with a pointed tip and strong steel body.The three jigsaw blades in the set are specially designed to cut through high-pressure laminate materials.The saw blade is 3.62 inches long and has 14 teeth per inch.
The carbide teeth have a high resistance to heat build up and have been arranged with a combination of aggressive small teeth and larger teeth.The teeth at the back of the blade angle back.The counter directed formation and thin blade kerf make it easier for the blade to move through the flooring.
The eight diamond-tipped teeth on the Norske Tools NCSBP284 miter saw blade are ideal for getting through hard materials like concrete and the abrasive wear layer of laminate flooring.Anti-vibration slots help prevent the blade from jumping and reduce sideways movement while cutting with the 12-inch laser-cut blade.
The large gullets on the blade scoop up the cut material without producing a lot of dust.The saw blade has expansion slots at the base of each gullet.The strength of the diamond teeth makes them ideal for tearing out old laminate or making rough cuts.The blade might cause chipping and tearing, so it isn't the best option for fine cuts.
With the right saw blade, a little skill, and a lot of knowledge, it can be a rewarding process that looks great when the project is complete.The answers to the most commonly asked questions will show you how to choose and use the best saw blade.
There are aluminum oxide chips that can wear down blades that aren't designed to cut through this material.Look for thin kerf blades that have between 80 and 100 carbide-tipped teeth, or consider using one with just a few diamond teeth that make quick work of hard materials like fiber cement and the wear layer of laminates.
The results will likely be rough at best, but a reciprocating saw can cut through laminate flooring.This is due to the fact that a reciprocating saw needs to bite into the material to create a clean cut, and that laminate is a smooth surface that tends to get scratched up by the saw blades.It is better to use a circular saw.