Bose Soundlink Color II battery will not charge fully.

The SoundLink Color's battery can lose charge after a few months of use.The guide will show you how to take apart the device and replace the battery.

Don't scar the casing when removing the covers, they are all glue on.Use a spudger or plastic opening tool to remove them.

If you cut the battery cover on the side, you won't damage the circuit.Try to not damage the cover too much as it will be used again.

It will be a pain to solder wires on the battery if you choose the Panasonic version with solder tabs.Time will tell if it looks like a good battery.

Attach the new battery, cut the leads, and pay attention to the polarity.You may need to enlarge the leads in the plastic case with a cutter.

It is necessary to put the sponge cover back in place.

This guide was completed by 62 other people.

There are more badges.

I need to know where to get a battery that will work as a replacement for mine.

There is a post in the center of the screws and a flat headed removal tool.If the attachment is being blocked by the post, how can you remove it?