Brinks Home Security Help - Resetting Beeping Keypads - what is Brink's trouble?

The purpose of this article is to help those who already have Brinks home security systems in their homes, and who are dealing with various problems as the equipment ages.

In June of last year, MONI Smart Security acquired the branding rights for the "Brinks" name and is now operating as Brinks Home Security.

It could be for a variety of reasons.Communication failure and a low battery condition are two of the most common causes.

The Brinks security system has a low battery condition that is easy to recognize.Press the "Cancel" button to stop the beeping.It's fairly easy to replace your Brinks battery.

If the Brinks alarm reads "CP TROUBLE", it means there is a communication problem.When the phone line is disconnected, this happens.Press the "Cancel" button to temporarily stop the beeping when the panel tries to call the central station.The only way to permanently stop this beeping is to reprogram your Brinks home security system to not send the 24 hour test and alarm signals.This can be done using the programming manual for most alarm brands.Brinks equipment is proprietary and programming manuals are not available.There is no way to change the system without the programming information.If you are willing to sign up for home alarm monitoring, you can probably have ADT security do the programming for you.If you don't want to monitor with the old system, you're out of luck.If you want a complete list of Brinks Trouble Codes, see this page.

If the Brinks alarm reads "CP TROUBLE", it means there is a communication problem.When the phone line is disconnected, this happens.The panel can't get through to the central station when it tries to send an alarm signal.

Press the "Cancel" button to stop the beeping.The next reportable event or test time will be silenced by this.

The only way to permanently stop this is to reprogram your Brinks home security system.This can be done using the programming manual for most alarm brands.Brinks equipment is proprietary and programming manuals are not available.There is no way to change the system without the programming information.

If you are willing to sign up for home alarm monitoring, you can probably have ADT security do the programming for you.If you don't want to monitor with the old system, you're out of luck.

There are several online sources where you can find the alarm user manual for Brinks systems.The user manual describes how to program codes.

It's not easy to find a Brinks home security system programming manual.Brinks equipment can only be serviced by an authorized dealer.There aren't many options since these no longer exist.The age of most Brinks home alarm equipment makes it difficult to work with, even for alarm installers with the correct programming information.The Brinks system would most likely be replaced by a newer and user-friendly panel.This would allow you to enjoy the improved features of a new alarm system.

It's not easy to find a Brinks home security system programming manual.Brinks equipment can only be serviced by an authorized dealer.There aren't many options since these no longer exist.

Broadview/Brinks was bought out by ADT Security years ago.The age of most Brinks home alarm equipment makes it difficult to work with, even for alarm installers with the correct programming information.

The Brinks system would most likely be replaced by a newer and user-friendly panel.This would allow you to enjoy the improved features of a new alarm system.

At alarmsbc.com, you can find and download security system manuals.

To turn the system off, enter a valid 3-digit disarm code followed by the "Cancel" key.The central station will be told it was a false alarm by this signal.

Enter your disarm code if the alarm occurred while you were out.The display will flash the zone number that caused the alarm.The display will clear itself after that.

Press the "Options" key until the display shows "Alarm Memory, Enter Code", then enter a valid 3-digit code.

If you accidentally trip a smoke detector and the fire alarm sounds, you can silence it by entering a valid code followed by the "Cancel" button.The display will show the zone number if there is still smoke or dust in the detectors.

Every 15 seconds, the keypad will chirp.Pressing the "Cancel" key will silence the beeping for 24 hours.

The system will attempt a reset.After 30 minutes, the beeping will start again.

There is no way to change the Brinks master code.One of the biggest reasons to upgrade an old system to something more modern is the design flaw of Brinks home security panels.

A visitor to this site contacted me about open-source software that he has developed that can be used with Brinks BHS-3000/4000 alarm systems.Before you decide to replace your system, you may want to try this.

All of your existing hardwire contacts on your doors and windows can be re-used.

The panel and keypads need to be replaced.Even though this is an expense, keep in mind that Brinks- branded equipment is several decades old.There won't be much of a lifespan left in these components.

You can find out how much it would cost to replace your Brinks system by filling out the form below.You don't have to buy anything when you receive estimates by email.

Keypad Trouble Light and Trouble Codes, Low Battery Problems, and Lost Master Code are some of the problems Brinks Security Alarm Help can help with.

Return to Home Security Systems Answers from Brinks.

I get commission from companies and products I discuss.The compensation doesn't change the price that you pay.I only endorse products and services that I truly believe to be an honest value for you, as a visitor to my site.

This site is supported by affiliates.A small commission is earned from purchases.Lee Russell is a participant in the Amazon Services LLC ASSOCIATES Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.