A 1/8-inch toggle bolt can hold the least amount of weight. Mounted onto 3/8-inch wallboard, it can support up to 30 pounds. ... Meanwhile, a 1/2-inch bolt can secure up to 65 or 70 pounds in 3/8-inch thick wallboard or up to 100 or 105 pounds in 3/4-inch thick wallboard.
How much weight can a 3/4 toggle bolt hold?
Toggle Bolt Installation and Sizing The thicker the bolt, the more weight it can support. A 1/8-inch toggle bolt can hold the least amount of weight. Mounted onto 3/8-inch wallboard, it can support up to 30 pounds. On 3/4-inch wallboard, it can support up to 55 pounds.
How much weight can toggle bolts hold from drywall ceiling?
Toggle Bolts Can Hold the Weight on Drywall Also known as butterfly anchors, they are great at holding objects on the wall. Plastic can hold about 20 pounds, while the metal holds up to 100 pounds such as a drawer or a floating shelve. They are also great to use on the ceiling, but only up to 15 pounds.13 oct 2020
What weight should a toggle bolt be?
Weight Support The strength of the toggle bolt is determined by the length and diameter of its screw body. A 1/8-inch toggle screw, for example, is able to hold a 50-pound object on half-inch drywall. A 3/8-inch toggle is capable of supporting 100 pounds.
How big of a hole do I need to drill for a toggle bolt?
The drill bit must be slightly larger than the butterfly wings when closed on the toggle bolt. For example, use a 3/8″ drill bit to create the hole for a 1/8″ toggle and a 1 1/4″ bit for a 1/2″ toggle.
How much weight will a 3/16 toggle bolt hold?
Strongest and most secure of all hollow-wall anchors. Holds up to two times more than wing toggles of the same bolt diameter: up to 802 Lbs. in concrete block and up to 238 Lbs. in 1/2-in drywall with 3/16-24 x 2-1/2-in bolt included in package.
How do you use a molly toggle bolt?
https://www.youtube.com/watch?v=LkcQr1lFU5M
Can you hammer in a molly bolt?
Anchoring With Molly Bolts You've generally got two choices when it comes to molly bolts, or “hollow wall anchors”: pointed and un-pointed. The dull-tipped un-pointed anchors require you to drill a pilot hole into the drywall. Pointed tip styles don't need a pilot hole; you can just tap these into place with a hammer.
What is a molly nut?
The Jack Nut or Molly threaded insert is an economical blind fastener designed for assembly-line use in thin, soft, or brittle materials. When tightened, the body collapses to form legs which grip the inside of the mounting surface, leaving a permanent, reusable threaded insert.