Can you plug a turntable directly into a receiver?
Can you plug a turntable directly into a receiver?
Simply plug the turntable's audio signal cable into one of the receiver's analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receiver's "CD" or "Tape" input, if needed. No other connections are required.
How do you hook up a turntable to a receiver?
If your receiver has phono input, connect the red and white RCA cables to the receiver's left and right audio inputs. Plug the RCA cables to the audio outputs of the turntable. Ensure each color is connected to the matching channel on the turntable and the receiver. The pre-amp switch should be in the phono position.
Is phono input the same as aux?
Unless the turntable you have just bought has a phono pre-amp built in. If that's the case plug the turntable into a spare input, like the auxiliary or "aux" ports. Don't plug it into a "phono'' input or you may blow your speakers up.
Does my receiver have a phono input?
Look at the back of your receiver and examine the audio input options. Receivers with a built-in phono preamp will have inputs labeled “Phono.” (If the receiver does not have an input labeled that way, jump to step 4 below).
What is phono on my stereo?
The PHONO/LINE switch turns the turntable's internal RIAA preamp off/on, thus providing the correct equalization for your turntable's current setup.
Can I use phono input for aux?
Yes, the aux input on a receiver can be used for phono, but only if you use a stand alone phono preamp for your turntable or if your turntable has a built in phono preamp.May 1, 2021
Do all receivers have phono?
Most newer amps and receivers do not have a phono preamp built in. Again, just like with one built into your turntable, if you connect things up and everything sounds fine, then you have a built-in phono preamp. Remember to connect the ground wire from your turntable if it has one as well.
How do I know if my receiver has a phono preamp?
To check if a receiver has a built-in preamp, check if the receiver has a PHONO input. A receiver with a PHONO input definitely has a built-in preamp. If your receiver has a PHONO input, you can connect a turntable without a phono preamp to that input. This way, you will use the preamp that is built into the receiver.
What is phono input in a receiver?
(PHONOgraph input) A socket on an amplifier or receiver that accepts signals from an analog turntable. The phono input circuit boosts the signal and provides the RIAA equalization necessary to restore the original sound. See phono preamp and USB turntable. Phono In.
How do you hook up a turntable to a stereo receiver?
Plug the RCA cables to the audio outputs of the turntable. Ensure each color is connected to the matching channel on the turntable and the receiver. The pre-amp switch should be in the phono position. If the receiver has a grounding nut, you can connect the ground cable between the receiver and the turntable.