Can you really sharpen your Scissors with aluminum foil?
Dull scissors are peskier than your housefly.Being interrupted in any task by a pair of dull scissors that refuse to deliver is very annoying.Replacing dull scissors with a new pair is not a solution.
Chances are you still use your scissors even if you aren't a do-it-yourselfer, a cook or a craftsperson.There are many ways in which scissors can be used around the house.
Purchasing a new pair of scissors every time the old pair gets dull is wasteful, but that is exactly the practice promoted by the prevalent commercialization in today's society.
If provided with a little care, a pair of scissors can prove useful over the years.With a little time and effort, you can easily sharpen your scissors at home.
You can watch the video to learn how to sharpen a pair of scissors in just 3 minutes.
A sheet of foil can be folded multiple times.This will help sharpen the scissors.
Use the scissors to cut the piece of foil into strips.The entire length of the blades should be cut in full strokes.
Before checking the sharpness, repeat a couple of times.Continue until the scissors become sharp.
Wet a paper towel with water.Use a damp paper towel to wipe down the blades of the scissors.
To align the metal shaft of a screwdriver between the blades, open the scissors wide.
If you want to cut it, close the scissors around the shaft.The entire length of the blades should be dragged across the shaft.
Test the sharpness of the scissors by repeating about 10 times.Continue until the scissors are sharpened to your liking.
Get a piece of steel wool and use it for scrubbing and cleaning.Use the dull blades of your scissors to cut the steel wool.While cutting steel wool, make sure you work the entire length of the blades.
The steel wool needs to be cut about 10 times.If necessary, repeat.You can touch up the sharpness of your scissors with this method.
Tosharpen the scissors on a sharpening stone, you need to take them apart.Remove the blades and separate them.
To lubricate the stone, spray a little water.Take care of the side that you will be using.If you want to touch up the blades, you can use the side of the stone.If your scissors are dull, you should start with the side that has the coarser grit.
You can use oil as lubrication.While some hardware stores sell "honing oils" for this purpose, any sort of oil or water can do the trick.
The blade should be on the stone.The stone should be facing the inner side of the blade.Take the blade by the handle and balance it with your other hand.
Keep the edge of the blade flat against the stone by moving it at an angle.You can sharpen the blade by repeating the strokes 10 to 20 times.
Give each blade a couple of pulls on the side of the blade after it has been worked on.
The blades should be put back together.The scissors should be opened and closed a few times.The metal on the edge of the blades forms during the sharpening process.
The rough side of the sandpaper needs to be folded.With each stroke, this will help sharpen the blades.
Use the dull blades of your scissors to cut the sandpaper into strips.Make sure you use long strokes when cutting to make sure the entire length of the blades come in contact with the paper.
Put the paper towel in the warm water.Remove the debris from the blades of the scissors by wiping them down.