For installation on wood subfloors with joists to 24" (61 cm) o.c., apply a 1/2" (13 mm) thick layer of LevelQuik® RS over 3/4" (19 mm) Exterior Grade Plywood with a with a minimum of 2.5# properly-fastened metal lath.Aug 12, 2014
How long does level Quick Rs take to dry?
Dries to a walkable hardness in 2 - 4 hours. 4 hours for ceramic tile and stone; 14 hours for impervious floor coverings. Drying time can vary with temperature and humidity. Test for moisture content before applying vinyl or wood flooring.
What is Quick level?
LevelQuik® RS is a premium, calcium aluminatebased, high quality self-leveling underlayment that achieves greater than 4300 psi compressive strength and incorporates low-prep technology. ... This quick setting underlayment can be applied up to 1.5" (3.8 cm) thick in one pour and seeks its own level in minutes.
Can you use Level quick on wood floors?
Floor leveling compounds are actually made to go over concrete. Most will work on wood as well, but it's important to verify that the compound purchased will. Always buy more than needed, as the pour must be done completely to ensure that it levels. Going back to the store for more isn't an option.Nov 14, 2020
How long does level set take to dry?
Do not walk on the resurfaced floor until it has fully gained sufficient strength. This is approximately 1 to 2 days for the Normal Set product or 2 to 4 hours for the Fast Set product, depending on surrounding conditions. No special curing steps are required.
How long does quick primer take to dry?
Primer takes between one and four hours to dry on average. However, the exact drying time depends on the primer type, room temperature, humidity, and the surface you're painting. Most manufacturers advise waiting at least 60 minutes before painting over the coat of primer.Aug 3, 2021
How does level quick work?
https://www.youtube.com/watch?v=G3NhkcEuqU0
How do you level quick self-leveling underlayment?
https://www.youtube.com/watch?v=mWRHhiAJ7nc
How much does a bag of self-leveling compound cover?
bag will cover approximately 40 Sq. Ft. at 1/8 In. thickness.
What area does a bag of self-leveling cover?
approximately 40 Sq. Ft.
How much floor leveler will I need?
At half-inch thickness, a 50-pound bag of Concrete Leveler will sufficiently cover 12 to 15 square feet. For a quarter-inch-thick application, the same size bag would cover between 24 and 30 square feet.Jul 1, 2015
Can self-leveling compound be used on plywood?
If you've got a plywood subfloor, like many buildings do, you can leave it in place and apply self-leveling concrete directly on top of it. ... You can also use self-leveling concrete on plywood as an underlayment for other types of floor coverings, such as carpet or tile.Jul 14, 2020
Can you use self leveler on wood?
Wood floors need to be primed before covering them with self leveler. The floor will be covered with water-saturated leveler, which will cause the wood to swell. It will shrink back down when it dries, which could cause cracks in the underlayment and tiles above. The primer prevents the wood from absorbing water.Mar 26, 2021