A chalkboard paint can be used to turn almost anything into a fun surface.This article will show you how to paint wood, walls, and glass with chalkboard paint.Project ideas are included in the article.
Step 1: The chalkboard paint can be used on wood.
You can turn almost any wooden surface into a chalkboard, or you can use chalkboard paint to make labels on boxes and storage containers.You will learn how to paint a wooden surface in this section.
Step 2: If necessary, sand your surface.
If you want a smooth finish on your piece, you will need to sand it down with 120 to 200 grit sandpaper.Sand along the wood grain with a sanding block.Once you are done sanding, wipe the surface clean with a tack cloth to get rid of any dust.
Step 3: If you don't want the areas to be painted with painters tape, cover them.
This will help you get a good edge.You can use thin sheets of plastic to make your own shapes.
Step 4: Put primer on your surface and let it dry.
You should apply primer to the area you are going to paint after you have sanded your piece.You can use a paintbrush, foam brush, or paint roller.A spray-on primer can also be used.Wait for the primer to dry before painting.It can take anywhere from two to four hours.Each brand has its own drying times, so refer to the instructions on the can.If you are using a spray-on primer, hold the can six to eight inches away from the surface and apply it using light strokes.You should be in aventilated area.
Step 5: If necessary, add a second coat of primer.
You may need to sand the primed surface if the wood grain is textured.Once the primer has dried, use a fine-grit to gently sand the surface.Make sure you follow the grain.Remove any dust with a tack cloth.
Step 6: Let chalkboard paint dry after applying the first coat.
You can apply the first coat of paint using a paintbrush, foam brush, or paint roller after the primer has dried.You can use chalkboard spray paint as well.Make sure you follow the wood grain as you apply the paint.It will take two to four hours for most paint to dry.For more specific drying times, read the manufacturer's recommendations on the container.You should be in a well-ventilated area if you are using spray-on chalkboard paint.Hold the can six to eight inches away from the surface to apply the paint.
Step 7: Let the paint dry after applying a second coat.
If you want to go against the grain, apply a second coat after the first one has dried.If you can't see the grain, then paint in the opposite direction.
Step 8: The painter's tape has to be removed.
To score the edges after the paint has dried, use a craft knife or scissors.This makes it less likely that the paint will rip when you remove the tape.Pull the tape off after you have scored the edges.If the areas are even, fill them in with paint using a fine-tipped brush or remove them with a craft knife.
Step 9: The surface should be prepared for use.
Allow the paint to cure for three days.Rub white chalk over the entire painted surface, then wipe it off with a damp cloth.You can draw or write on your surface.Refer to the manufacturer's directions for more specific times to cure.Some craft-grade paints are ready to be used in as little as 24 hours, while others may take more than three days to cure.
Step 10: Chalkboard paint can be used on walls.
You can paint most walls with chalkboard paint.It works well in kitchens, offices, and playrooms.You can write recipes and shopping lists.You can use it as an outlet for your creativity.This section will show you how to apply chalkboard paint.
Step 11: Remove hanging ornaments.
You need to move the wall out of the way if it has anything on it.If you can't move large items, consider covering them with a plastic cloth.
Step 12: Light, outlets, baseboards, switches, and window sills should be protected.
Light switches, outlet covers, and baseboards can be removed or covered with painter's tape.Use painter's tape to cover window sills.To seal the tape, use a pallet knife or a flat painter's knife.
Step 13: If you have dents or holes, fill them with wall filler.
You will need to fill it in with wall filler if you want to get something back into the hole.After you paint the wall, there will be holes and dents that need to be filled in.
Step 14: Let the wall dry afterprime it.
To create a smooth surface and help the chalkboard paint adhere better, you will need to prime the wall.You can sand the wall using a pole.You should mop up any dust once you are done.Lead-based paint can be found on the walls of houses from the 1970s or older.Respiratory protection should be used so that you don't get sick.You can use primer to paint it.Wait for the primer to dry and apply it with a paint roller.Refer to the can for more specific directions, but this will take two to four hours.
Step 15: Consider applying a liner to the wall.
You may need to apply a wall liner if the wall is still bumpy.Even after painting, heavily textured walls will retain their texture.The wall liner needs to be cut down to the width of the wall.If you bought a wall liner with a backing, you will need to soak it in water for 10 minutes.Refer to the manufacturer's instructions for more specific directions.If the back of the liner is tacky, apply it to the wall.If you want to smooth out air bubbles or ripples, Align the first piece with the top of the wall.Just below it, apply the next piece.Continue until the entire wall is covered.You will need to apply the glue to the back of the liner yourself if you bought a plain wall liner.Some glues need to be mixed with water.Once the glue is ready, spread it onto the back of the wall liner, then press it to the walls, just where the ceiling begins.The wall should be extended by the paper.Smooth out any air bubbles or ripples.Just below it, apply the next piece.Continue until the entire wall is coated.
Step 16: Paint over the windows and wall edges.
Use a paint brush to apply the paint around the windows and the wall edges.If you are painting an entire wall, the crease between the walls and the ceiling is where the wall and ceiling meet.Wait for the paint to dry and apply a second coat.
Step 17: Put the paint into the pan.
Don't pour all of the paint at once.You will be painting in small sections and the paint may dry before you finish.If you refill your paint pan, be sure to stir the paint so that it doesn't settle.
Step 18: Wait for the paint to dry and use a paint roller to paint the walls.
Use an up-down-up motion to apply the paint.Work in small sections.Wait for the paint to dry.Refer to the manufacturer's instructions on the can for more specific drying times.While you wait for the paint to dry, be sure to clean your paint roller.The paint may dry on the roller if you don't.
Step 19: After applying a second coat of paint, it will dry.
You can apply a second coat after the first one has dried.Allow the paint to dry for three days so that it can cure and be used as a chalkboard.
Step 20: The tape and other coverings need to be removed.
You can return appliances to their former positions once the paint has dried.Wait until the paint has cured before you remove the painter's tape.
Step 21: Put chalk on the surface to prime it.
You will need to cover the surface with chalk after the paint has dried and cured.After covering the entire surface, wipe it clean with a damp cloth.The wall is ready to be used.
Step 22: Candle holders, mason jars, and wine glasses can be painted with chalkboard paint.
You will need to care for the piece after you have painted it so that the paint won't chip.This section will show you how to apply chalkboard paint.You will need chalkboard paint to paint porcelain mugs and plates.Once the paint has dried, it will need to be baked in the oven.Refer to the manufacturer's instructions for more specific curing times and baking temperatures when painting your porcelain mug.Some paints need several weeks to cure, while others have to be cured for a few days and baked in your oven.
Step 23: Rub alcohol on the surface of the glass.
The cotton ball should be soaked with rubbing alcohol and wiped clean.The primer and paint might not stick properly if there is oil in it.You can use glass cleaner if you don't have rubbing alcohol.
Step 24: There are areas you don't want painted with painter's tape.
You need to cover the areas that you don't want painted with painter's tape in order to get clean lines.You can make your own by cutting shapes out of thin sheets of plastic.
Step 25: The surface of the glass needs to beprimed.
The chalkboard paint needs to beprimed in order to stick to the glass.You can either paint the surface with spray-on or paint on primer.To let it dry completely, be sure to use one intended for glass.For more specific drying times, refer to the manufacturer's instructions on the can.It will take two to four hours for most primers to dry.Use steel wool to buff the surface of the glass.Rub alcohol on the surface to get rid of any dust caused by buffing.
Step 26: Wait for the first layer of chalkboard paint to dry before painting.
You can use a paintbrush or foam brush.You can use chalkboard spray paint, which will give you the smoothest finish, but it may not be as durable and be prone to chipping and scratching.Wait until the paint has dried before moving on.Just because the paint feels dry when you touch it doesn't mean it has completely dried.Some brands might be ready in less than an hour, although this can take anywhere between two to four hours.If you are using spray-on paint, hold the can six to eight inches away from the surface and apply a light, even coat.
Step 27: Let it dry before applying a second coat.
Apply a second coat after the first has dried.You have to let the paint cure for three days before you can use it as a chalkboard.
Step 28: The painter's tape has to be removed.
Pull the painter's tape off by scoring the edges with a craft knife or scissors.When you remove the paint, scoring the edges will make it less likely that the tape will tear it.If there are gaps along the edges, fill them with paint using a fine-tipped brush.Use a craft knife or fingernail to remove excess paint.
Step 29: The surface needs to be prepared for use with chalk.
You have to let the chalkboard cure for three days before you can use it.You will need to condition the surface by rubbing white chalk over it, and then wiping the chalk off.The surface is ready to use.Refer to the manufacturer's instructions for more specific times to dry.Some surfaces will be ready to use in a few days, while others will need more time to cure.
Step 30: You should wash your glass surface.
Don't put your painted glass in the dishwasher or let it soak in water.Doing so can cause the paint to chip.Use a sponge or a dishcloth to wash the glass.They may scratch off if you scrub the painted areas.
Step 31: You can use chalkboard paint to make labels.
You can use chalkboard paint to make labels on bowls, ceramic pots, and even dressers.You can use chalk to write.When the contents of the container change, you can simply wipe the chalk off with a damp cloth and write something new.
Step 32: Chalkboard paint can be used to make a fun surface.
chalkboard paint can be used to paint walls, table tops, and even fridges.You can use the chalkboard surface in your kitchen to write down recipes and shopping lists.Before painting your wall, make sure it is smooth.It is difficult to write on a porous surface with chalk.You will need painter's tape to mask off window trims and baseboards, as well as anything you don't want painted.
Step 33: Use stencils to make shapes.
There is a painted patch of chalkboard that does not have to be square or rectangular.To make your painted area look like a heart, circle, or oval, you can use a stencil.
Step 34: When the paint has dried, stick a shape onto your surface and peel it off.
There is a patch of wood or glass left.
Step 35: You can make a grid or title with regular paint.
When chalkboard paint has dried and cured, you can paint a grid or title onto it with regular paint.This works well for calendars, charts, menus, and anything that you want to have a permanent title on.You can either use regular paint and a small brush or use paint pens.Water-based paint or paint pens should not be used.When you clean the board with water, your design will come off.
Step 36: You can mix your own chalkboard paint.
Unsanded tile grout can be added to a cup of paint.You can paint your surface with store-bought chalkboard paint.Sand it lightly after it is dry.You can condition the surface by covering it with white chalk and then wiping it clean with a damp cloth.
Step 37: Plant markers can be created in the garden.
If you want to label your herbs and plants in your garden, you can paint garden plant markers with chalkboard paint and write their names on the surface with chalk.
Step 38: You can make your own markers by using popsicle sticks or wooden skewers.
You can use a variety of shapes.Wooden shapes with flourished edges and corners can be used to create markers.
Step 39: You can make your painted surface magnetic with magnetic paint.
After waiting 30 minutes for each coat to dry, apply five to six coats of magnetic paint.Refer to the instructions on the paint can before applying chalkboard paint, as some require only three days to cure, while others require up to five.After the last coat of magnetic paint has dried and cured, apply your chalkboard paint and let it cure for three days before conditioning it with white chalk.You can condition your chalkboard by rubbing white chalk all over it, and then wiping it off with a damp cloth.If you stir your magnetic paint often, the particles will not settle.Magnetic paint may not be strong enough to hold larger magnets.
Step 40: You can make your painted surface magnetic by painting it over galvanized steel.
A sheet of galvanized steel can be painted over to create a magnetic chalkboard.Before painting a sheet of metal, make sure it is magnetic.