Vaping devices rely on a tank system that holds e-juice in a chamber where it is exposed to a heating element.The vape tank needs to be cleaned regularly in order to maintain its performance.A warm water rinse is often enough for a quick clean.If gunk builds up in your tank, you may need to use alcohol to clean it.
Step 1: Take your device and disassemble it.
The battery and part of the vaporizer should be removed.Remove the top and bottom of the tank.Continue to disassemble the tank and pieces attached to it, taking care to remember where each piece goes.You will be able to clean each piece individually if you take the tank assembly apart as much as possible.If you think a diagram may be helpful, draw it.Different devices will have different parts.
Step 2: Warm water can be run through the tank.
You can hold the tank under the faucet for a short time.The water should be as warm as possible without being too hot to touch.This will help remove e-juice.A moderately powerful stream is provided by a faucet.Warm water will usually be enough to clean your tank if you clean it regularly.
Step 3: There is a paper towel in the tank.
Take a sheet of paper towel or microfiber cloth at the corner and fit it into the end of the tank.To get rid of residual water, pull the material back and forth through the tank.
Step 4: Individually clean other pieces.
Take the pieces from the tank and put them in a bowl of warm water.A short soak will assist in cleaning, and this will help you keep track of each piece.Use a small microfiber cloth or clean toothbrush to wash your assembly tank, especially those with fine features such as threading.
Step 5: For ten minutes, the air is dry.
A bit of water is likely to remain even if you dry the tank well.Allow everything to dry for at least ten minutes.Allow the tank and other pieces to dry.If you want to dry your tank, do not use heat or sunlight.
Step 6: It is recommended to wipe with high-proof alcohol.
It is possible to break down persistent e-juice deposits with high-proof liquor.Rub the dirtied areas with alcohol until the e-juice is removed.Use warm water to wipe and rinse.If you don't rinse and dry the tank after cleaning, it can be toxic.It's not a good idea to use soap or other detergents when cleaning a vape tank.
Step 7: You can use a jewelry cleaning machine.
Ultrasonic jewelry cleaning machines can be used to clean small, fragile items.There are similar devices for cleaning equipment.If you have access to one of these machines, fill it with warm distilled water, vodka, or rubbing alcohol and use it according to the instructions.You can buy these machines from a variety of stores.You can take your equipment to a store and have them clean it.Don't allow parts with plastic, rubber, or vinyl components to sit in alcohol for too long.One cycle in a cleaning machine is enough to clean your tank.After cleaning, be sure to rinse and dry your tank.
Step 8: It's a good idea to avoid soaking or boiling.
It is not recommended to overnight soak in water or alcohol.It is possible that boiling your tank will cause damage as well.These methods are risky and may not work with some pieces.
Step 9: You should clean your tank weekly.
It's important to have your device cleaned weekly.The quality of your vaping experience can be negatively affected by the fact that older e-juice cannot collect in your tank.
Step 10: The tank should be washed between flavors.
There are different types and flavors of e-juice.You may experience flavor ghosting if you don't clean the tank fully when you switch to a new flavor.e-juice from the previous load has formed a layer on the walls of the tank and is still contained in the coil of your device even if your tank appears empty.The tank needs to be cleaned to remove the flavor.
Step 11: It's a good idea to replace parts when necessary.
The heating coil is used in many vaping setups to produce vapor.You will usually be cleaning these parts when you clean your tank.Make sure to check them for wear when you do so.The coil should be changed frequently.Each time you clean the tank, check the o-rings for damage or wear.If you're unsure about their condition, change the o-rings.It is likely time to replace the coil if your vapor tastes bad after a cleaning.Less vapor coming through your device, any leaks, or an unsatisfactory vape are some of the signs that the coil or another piece may need to be replaced.