It's often necessary to cut the pipe to make projects out of it.It is easy to cut with a wide variety of tools, which makes the job very simple.You don't have to have a fancy set-up to cut it.There are different tools that can be used to get the job done properly.
Step 1: Attach the pipe to the vise.
The hacksaw is the most widely used tool in cutting pipe.It's important to secure the PVC in place with a vise, so that you don't accidentally cut yourself with the blade.The necessary precautions need to be taken in getting the pipe into the place.If you want to secure the pipe into place on your workbench, you could use a different type of work clamp.Use what is available.It's a good idea to put it a few inches away from the cut.If it's possible, you can use both sides of your cut, but only one is needed to make it secure.
Step 2: Where the cut is required, mark it.
You can use a permanent marker to clearly mark where you're going to cut.You can wipe the ink off with rubbing alcohol if you're not happy with it.
Step 3: The teeth should be placed in the pipe.
Place the hacksaw onto the mark and hold the handle firmly, then use your other hand to push down on the top of the saw, seating the teeth into the pipe.You want to start in the right place, and this will help to ensure that you don't start off with raggedy strokes of the saw.
Step 4: It was necessary to forcefully Saw through the pipe.
Don't let the saw drift from the mark you made originally, start sawing, and watch closely as you cut.Saw fast enough to keep the cut going, but not so fast that the teeth jump over it.You should be able to cut through it quickly.
Step 5: The pipe cutter is plastic.
There are two styles of pipe cutter.Sometimes it's too difficult to use a scissor style pipe cutter for pipe that big.The plastic pipe cutter is ideal for larger pipes and is also effective for smaller pipes.It's more reliable and safer.It would be easier to use a saw than a scissor-style cutter because of the arm strength required.It will be a lot easier to do your job with a ratchet style cutter.
Step 6: The lower part of the cutter has a half moon shaped pipe in it.
There is an open rounded edge to seat the pipe, and a blade that extends as you squeeze the handle.Seat the pipe in the mouth of the cutter to mark where you want the cut to be made.
Step 7: The blade should be put down on the pipe.
If you want to cut the pipe in half, you have to extend the blade.To hold the pipe steady, use your other hand.You shouldn't have to work hard.
Step 8: Consider using a saw and a box for more specific cuts.
There are many specific, detailed cuts that can be made with a miter saw.You can use a tooth-count saw to cut the job.It's a good idea to use a standard 10 tooth per inch wood blade, which comes with most saws.It depends on the brand and style of saw you have.
Step 9: Place the pipe under the blade.
You've got the cut-lines pre-marked alongside the box for you, so it's the easiest thing in the world to use.You will not be able to miss.
Step 10: The pipe should be secured with a work piece.
Start the blade and bring it down slowly.The process can be repeated with ease once cut.