Most drinking water has a small amount of chlorine added to it as a preventative measure against the spread of disease and dangerous pathogens.Exposure to these small amounts of chlorine can negatively impact your health, according to some studies.If you want to remove chlorine from your drinking water, you can boil it, add vitamins, or use a system in your home.
Step 1: You can use a pitcher filter to get rid of the water.
You can remove chlorine from drinking water by using a pitcher filter that you keep in the refrigerator.Many models and brands are effective at reducing chlorine levels.You can get a water purification attachment for your tap that will be just as effective as a pitcher filter.The manufacturer suggests that you replace the filter once every few months.
Step 2: You can use a reverse osmosis system in your home.
Special carbon filters are used in reverse osmosis water purification systems to remove chlorine from the water.These systems are relatively inexpensive and must be purchased and installed by a professional.If you want to have a reverse osmosis filter professionally installed under your sink, you can also set it up to filter all of the water that comes into your home.
Step 3: The GAC filter is a Granular Activated Carbon.
These kinds of filters are made from organic materials.The carbon in the organic materials is activated by heat, which allows the filter to absorb various chemicals and compounds.GAC filters can make your drinking water taste better.GAC filters can be purchased and installed by a professional plumbing or handyman.
Step 4: The water should be boiled.
The water should be placed in a pot on the stove.The water should be boiled for twenty minutes.It should be enough time for the chlorine to leave the water.The pot should be left slightly off-center so steam can escape to prevent too much of the water from leaving.Let the water cool before drinking it.
Step 5: The water should be left outside for 24 hours.
The chlorine will evaporate out of the water as gas if it is placed outside in the sun.Leave the water outside in a sunny location for 24 hours.While the water is outside, consider covering it with a clear plastic layer.There are small holes in the plastic.While still allowing it to be exposed to the sunlight, this will prevent other contaminants from getting in the water.The method may not be as effective as boiling the water.Most of the chlorine will be removed from your drinking water.
Step 6: Add the vitamins to the water.
It is possible to dechlorinate larger amounts of water before they are drained.This method can be used to dechlorinate drinking water.Allow the vitamins C tablets to sit in the water for 24 hours.To dechlorinate 1 US gal of water it will take about 40 tablets of vitamins C and E.
Step 7: Understand why water is treated with chlorine.
Adding chlorine to a community's drinking water is a preventative measure.It does a great job of ridding the water of harmful organisms that could harm you if you eat them.Chlorine has kept our drinking water safe for decades.
Step 8: Do you know about the risks of drinking water?
Overexposure to chlorine can be harmful, despite the benefits of chlorinated water.There have been documented increases in bladder cancer, colon cancer and breast cancer in populations that regularly consume chlorinated water.
Step 9: The taste and smell of water can be improved.
Many people like the smell of chlorine water, which is very similar to a swimming pool.The smell in your drinking water will be removed by dechlorinating it.Adding a lemon slice, using the water to make tea or coffee, or even allowing it to sit out overnight are all ways to improve the taste of your drinking water.