Do we still need to copy garage remotes?
The How To Clone / Copy / Duplicate Garage Door Remote Control simple instruction manual is free to the public.
Clone instructions are written using Solidremote Universal RF Remote Control Duplicator / Self-Learning Copy Remote to ensure successful copying of most garage door remote controls.
Solidremote RF Remote Control should be used when using the self- learning Universal RF remote control Duplicator.Although our Universal RF Remote Control Duplicator / Self-Learning Copy Remote should work on most standard RFRemote Controls out there in the market, please be aware that it may not work properly on some non-standard RF remote controls.We can give you detailed compatibility information.
BFT / DITEC / LIFTMASTER / MERLIN / NICE SMILO / ATA Rolling Code can be used with the Fixed Code Cloning Remotes.
Code recovery is not necessary if you cleared the code by accident and need to have the previous code restored.
All the transmitter codes in the memory have been erased when you press and hold down buttons A and B at the same time.
Next to copy remote, place your original remote.You can program onto the corresponding button on Copy Remote by pressing and holding down the Original Remote button.Hold the buttons down until you see the flash on the screen.You should be able to duplicate the code from Original Remote in a few seconds.
The clone procedure is complete because the button on Copy Remote will function the same as the original one.
If you press and hold down the buttons at the same time, the light on Copy Remote will flash twice or three times, and all the codes in memory will be recovered.
If your existing remote control doesn't work with your garage door opener and you follow the above programming procedure, there are two major factors to consider.Your existing remote control and copy remote must transmit the same signal.The standard for radio remote control apparatus in the USA and China is 315MHz.If required, the frequencies can be changed to anywhere between 960 and 240MHz.
If the procedures don't run successfully, please check if all prerequisites are met.
The Solidremote Universal RF Remote Control Duplicator can clone a vast majority of fixed-code RF remote controls, in which circumstance each time when the remote control button is pressed, the same code is transmitted.When the RF remote control is equipped with Code Hopping or Rolling-Code Technology, it's not possible to clone because these type of remote controls transmit a different code each time the button is pressed for better security.