On commercial jobs, fire codes often require seams to fall on the entire length of the framing, so the drywall must be hung vertically. However, on residential jobs, the drywall on the walls is typically hung horizontally. For walls 9 feet high or shorter, hanging the drywall horizontally has a number of benefits.Jul 27, 2016
What is the proper way to hang drywall?
- Starting with the top row, apply adhesive to the studs. ...
- Holding the first sheet horizontally across the ceiling and close to the corner, align both vertical sides with studs. ...
- Measure the remaining space, adding 1/4 inch for easier installation. ...
- Tack the second piece into place with ring drywall nails.
Why do you hang drywall from the top down?
When hanging drywall, always hang the ceiling first. This is the hardest drywall to hang, so get a partner and go slow. Large cracks due to misaligned sheets are hard to repair because the extra mud required to fill them will constantly fall out and drop to the floor (or worse, down the back of your neck!).
Should drywall seams be staggered?
It's not necessary to stagger seams on ceiling drywall. However, because these joints are relatively difficult to finish—and tend to be noticeable in the finished product—it's a good idea to stagger the drywall panels to make the joints less visible.
What happens if you dont stagger drywall?
Time – It takes longer to stagger sheetrock than to align panels in parallel. ... The wall length and ceiling area must be calculated, and staggering or not staggering the sheetrock may impact how many panels are needed to complete the job. Purpose – The type of finished job should be considered when hanging sheetrock.Apr 1, 2020
What order do you hang drywall?
Wall Panels Install the top row of panels first, pushing each panel up as tight as it will go against the ceiling drywall. Lifting and holding the panels takes at least two workers. The lower horizontal row of panels is the last to install. Push it up tightly against the top row.
Should I leave a gap between drywall sheets?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall.
Is drywall supposed to touch the floor?
Drywall should definitely not touch concrete as moisture will wick (ie flow up the surface as in a candle/lamp wick) into the drywall and encourage mold growth. 3/8" should be sufficient - your prop up plan is not only appropriate, but a common technique used by drywallers.Dec 7, 2011
How close should drywall be to the floor?
Always leave a 1/2-inch gap at the floor. This allows for floor and wall expansion without cracking the drywall. It also helps prevents moisture wicking if the floor floods.
How do you fill the gap between drywall and floor?
Use a drywall knife to fill the large gaps with ready-mixed joint compound. If time is a factor, use fast-drying joint compound. Allow the joint compound to dry until it's white or according to the manufacturer's specifications. Chances are one or two coats will be sufficient.
Can drywall rest on the floor?
If you've already installed drywall while letting it rest on the floor, all is not lost, but you have your work cut out for you. Use a drywall knife to fill the large gaps with ready-mixed joint compound. If time is a factor, use fast-drying joint compound. ... After that, you can proceed with drywall finishing as normal.
Do you drywall ceiling or walls first?
Hang drywall on the ceiling first, then the walls. Check the ceiling for bowed joists using a 4-ft.Oct 5, 2007