New brake pads need new hardware. It's important that every time you change your brake pads you are changing the brake pad hardware with them.
What is the metal piece on brake pads?
The brake pad brackets are called 'adapters'.Apr 21, 2015
What are the clips on brake pads for?
The clips are designed to push the pad away from the rotor. This can keep the brakes cooler, reduce noise and extend the life of the pad. The clips fit between the pads and rotor and push the pads away from the rotor. These clips have more spring, while not preventing the movement of the caliper's piston.
Do you really need brake hardware?
A fresh set of hardware can gain horsepower and fuel economy by reducing brake drag. The constant heating and cooling of even normal driving will weaken your springs and anti-rattle clips over time. Weak hardware can result in excessive movement, binding, pulling, warping, uneven wear, noise, or other problems.
Can I put brake pads without hardware?
Putting brake pads on without the hardware will cause vibration and noise. Also do not forget to use brake grease on the contact points of the pads. Most brake pad kits on the market have a little bag with grease. Some brake pads come with the shims already attached to them.
Are brake clips necessary?
These clips can increase fuel economy while eliminating brake noise. These springs/clips can be difficult to install, but they always should be re-installed. ... This can keep the brakes cooler, reduce noise and extend the life of the pad. The clips fit between the pads and rotor and push the pads away from the rotor.
What does the brake hardware do?
Brake hardware consists of all the supporting components in, on and around the calipers and pads that help properly align the brake pads or shoes and retract them away from the rotor or drum for smooth, reliable, quiet and efficient brake performance.
What is the hardware on brake pads?
Brake hardware is what holds your brake pads into place. Located in the caliper, brake hardware will determine how solid your brake system is as a whole. Even the most reliable brake pads won't be able to function consistently without solid hardware.
Do brake pads come with clips?
New brake pads usually come with new retaining clips. The clips may be specific to either the left or right side of the vehicle, so make sure that you are using the appropriate clip. Remove the old clips and replace them with new ones. They will easily snap into place.
Do brake pads come with screws?
Replace the retaining clips New pads almost always come with new clips, which allow the pads to slide back and forth easily. Use the new ones and chuck the old ones. There are no retaining screws for the clips. ... Apply this to the clips of the new brake pads to keep them from squeaking, as shown in the photo above.
What happens if you don't put the clips on brake pads?
They know it does. The study, in an independent automotive testing lab in Sweden, found that reusing old clips wears out new pads prematurely and leads to more noise, costing customers extra money and causing a lot of potential comebacks.