Air quality can be negatively impacted by mold, a type of fungus that can grow in many places, but can pose a health risk inside your house.It's important to prevent mold in your house for the health and safety of your family and visitors.The good news is that it is easy to prevent mold in your house.
Step 1: You should keep an eye on the humidity levels.
One of the most important ways to prevent mold is to keep your house dry.A hygrometer will measure the humidity in your home.If you want to prevent mold growth, you should keep the humidity in your house below 60 percent.
Step 2: When bathing, open windows.
To prevent the build up of water in the bathroom, open a window and let the air out.If you don't have a window in the bathroom, leave the door open and open the closest window you can.
Step 3: After bathing, wipe down the walls.
The walls of the shower or tub can be a breeding ground for mold.The best way to stop this from happening is to wipe down the walls with a sponge, towel, or squeegee after you bathe.It is important to get your whole family on board with wiping down the walls after a shower.
Step 4: Don't ignore the damp clothes.
Don't leave wet clothes to sit in the washing machine as mold will grow on them.When the washing cycle is over, remove the clothes from the machine and transfer them to the line.When you do laundry, set a timer so you don't forget.Don't leave damp clothes or towels on the floor or in a laundry basket.It's a good idea to hang wet things to dry.
Step 5: Clothes should not be hung to dry.
If you don't have a dry cleaner or prefer to line your clothes, hang them outside.mold can grow on walls, floors, and other surfaces if water from the clothes hangs in the air in your home.If you have to hang clothes to dry inside in the winter, make sure the room is well-ventilated, the air is circulating, and the fans are on.
Step 6: Immediately spills and floods.
It takes between 24 and 48 hours for mold to grow.As soon as a spill, leak, or flood occurs, address standing water.Water on carpets and floors.
Step 7: Vents and exhaust fans are used.
The kitchen, bathroom, and laundry room are some of the most important rooms in the house.Exhaust fans can be turned on in the kitchen and bathroom.In the laundry room, make sure the dryer is on the outside.Make sure that your crawl space and basement are well-ventilated.Vents or fans should be installed if the air isn't circulating enough.
Step 8: There are empty trays.
Some appliances have trays that catch water.Refrigerators, air conditioners, and dehumidifiers are included.Don't let mold grow in them if you drain and clean them regularly.spills, leaks, and overflows can cause problems under the fridge and on basement floors if they are left unattended.
Step 9: Increasing the amount of air circulation.
If you want to control the humidity in your home, you need to keep the air moving and provide a source of fresh air.When the weather is nice, open the windows and use ceiling fans to circulate the air inside.Standing or oscillating fans can be used if you don't have a ceiling fan.
Step 10: It's a good idea to run a dehumidifier.
If you don't have a dehumidifier in the house, it will help you control the humidity.It is important to have dehumidifiers in damp areas.Setting up at least two dehumidifiers in different areas of the house is a good idea if you have a large home.
Step 11: The carpets in the bathroom and basement should be replaced with area rugs.
Areas that are prone to being wet should not be carpeted.This includes the bathroom that is prone to flooding.If necessary, install area rugs.If they get wet, area rugs are better than carpets.
Step 12: Improve the insulation.
Walls, pipes, and tanks are susceptible to having condensation form on them.Extra insulation can be used to prevent this.Adding insulation to the basement, exterior wall, attic floors, ceilings, and windows is accomplished by wearing metal pipes with insulation sleeves.If there is condensation on any of these surfaces, you should dry it immediately and inspect it regularly to keep it dry.
Step 13: Fix leaks.
In a house, leaks can come from pipes, appliances, the roof, and faucets and taps.It's a good idea to inspect your home regularly for leaks and signs of water damage.It is a good idea to check for leaks around fridges, water coolers, and ice makers.
Step 14: Water should be drained away from your house.
It is possible for water to get into your house from outside.It is possible to get rid of water by drawing it away from your house.If you need to direct rain away from your home, installing extra gutter is a good way to do this.If you can't get the water to come in, consider installing vapor barriers in the basement.
Step 15: Fix the gutter.
It is important to keep the Gutters clean and well maintained because they are an important part of the system that keeps water away from the house.The gutter needs to be cleaned every fall and spring.As soon as you notice the leaks, address them.The section of damaged gutter should be replaced if you can't fix the leak.
Step 16: Plastic sheets can be put in crawl spaces.
A crawl space that has a dirt floor is vulnerable to mold because it can get wet all the time.If you want to prevent this, cover the dirt with a sheet of plastic.If you cover the dirt it will stop mold from growing in the crawl space.
Step 17: Dust and vacuum should be done on a regular basis.
If you keep your house vacuumed and dusted, you will be able to remove mold from your home and prevent it from growing.If you want the best results, vacuum and dust your home weekly.It isn't necessary to use a vacuum that has a HEPA filter.
Step 18: You can run filters.
Along with vacuuming, running filters or air purifiers in your house will also help to eliminate mold in the air.In damp areas, filters can be useful, as well as near entryways like doors and windows.The majority of pollutants are removed from the air with the help of the most effective filters.
Step 19: The sun should be let in.
Natural light into your house can help prevent mold from growing.Natural light can be allowed into your house by opening your curtains during the day.The heat from the sun will help to dry the house.Light drapes and curtains allow light to pass through in the summer.In winter, lightweight drapes allow too much cold air in.
Step 20: The temperature needs to be maintained.
mold and dark spaces both grow better in warm areas.Use your air conditioner in the summer to keep your house cool.If the temperature is below 70 F, most molds can't grow.It would be very expensive and inefficient to keep your house at this temperature, but you can still use the air conditioner to cool it down.The heat should be kept as low as possible.