Downlights.co.uk has information on how to position downlights in a kitchen, bathroom, and living room.
We will explain how lighting can make a dramatic difference to the look and feel of a room in this handy guide on how to position downlights.The ideal arrangement can be created when downlights are part of your lighting scheme.
Downlights are available in a range of colors, tones and brightness and are used to cast their light down from the ceiling.
If you're considering making the switch but aren't sure how to go about it, this article will give you all the information you need.
If there is a doubt or requirement by the law, consult a registered electrician.All products have to be installed in accordance with local building regulations.
Current building regulations and IEE wiring regulations must be followed when installing led downlights.The sustainable code requires new builds to meet it.
There are two common options for lighting, downlights and halogen.
LED prices have come down significantly in the last few years and are now more competitively priced.Regardless of initial outlay, LEDs have a number of advantages over halogen bulbs which makes them much more cost-effective.
For a long time, the brightness of a bulb was measured in Watts.The brightness of a traditional bulb was related to its power consumption.Downlighters and most modern bulbs don't follow this relationship.
The lm is an appropriate way to classify bulb brightness.The total amount of visible light comes from a light source.Another unit is used in the lux.One lux is equal to one watt per square metres.
A basic kitchen may require 400lm, but if a number of task areas are included, that could rise to 800lm.A hallway with sufficient light to see clearly as you pass through would require 300lm in total, and a seat used for reading would need as much as 400lm.
If you want to know how to position spotlights correctly, you have come to the right place.A number of downlights can be combined to illuminate an entire room.Careful thought needs to be given to how many lights you need and where to put them.
Allowing one downlight per 1.2m2 will provide high levels of lighting.If you want to calculate numbers and spacing more precisely, you need to consider everything from the room's decor to its intended usage.
Which parts of the room need more light?Before anything else, deal with these areas.If you are planning a lighting scheme for a bathroom, your starting point should be above the wash basin because of the extra brightness.The remaining downlights can be added around them once they have been arranged.
Shadows around the edge of the ceiling can make a room appear smaller than it really is, if you position downlights too close to a wall.There is a 75 cm gap between the downlights and the edge of the ceiling.This will allow the light to spread and light up the whole room, making it appear well lit and spacious.
The light comes from a downlight that is in the shape of a cone.The cones of light should intersect above the floor.A higher ceiling doesn't need additional downlights to produce a pool of light, but it does need the individual bulbs to be powerful enough to provide enough brightness all the way down to the floor.
To calculate the spacing between downlights, you divide the ceiling height by 2 and use the result as the separation distance.Decor, room shape and the number and size of windows are some of the other factors that will be taken into account in your final decision.
The intended use of a room is an important factor.The general level of brightness is dictated by the function of the room.Unlike traditional lighting involving a single central pendant light plus additional table and standard lamps as required,LED downlights can be located strategically to assemble a lighting solution tailored to the precise needs of the room.
Dimmable downlights give you more control over your lighting.Dimming gives you the option of installing downlights that provide too much light then reducing the lighting level manually as required, rather than attempting to create a single ideal lightinglevel that will be fixed permanently.If you want to avoid buzzing and damage to the bulbs, choose a trailing edge dimmer.You can find more information about the dimmers on the internet.
If you want to see your face for washing and shaving, make the most of the mirrors with one or two downlights.Downlights can be used to prevent shadowy corners.The bathroom lighting blends safety and practicality.When taking a relaxing bath, installing a dimmer will transform the room.
When electricity is used in a wet environment, extreme care must be taken.There are strict rules that must be followed.You need to know about bathroom zones to understand these regulations.
The bathroom has four zones: 0, 1, 2, and the Outside Zone.Each zone has specific requirements for how well a light fitting can be protected against the elements.The degree of protection offered is marked by two digits, the first being how dustproof it is.To 6 is a max.The second refers to how waterproof it is.To 8 is a max.).
The shower or bath is above the floor.The lights must be rated at least 45 degrees.
Up to 2.25m above the floor is an area extending beyond the bath, shower and wash basin.The lights must be rated.
Outside zones 0,1 and 2 are likely to have no water.Water-resistant fittings are advisable to protect the lights from excessive steam and splashes.This will make the light perform better and give you peace of mind.
In the evening, we relax in the living room, play games, and watch TV.We hang paintings and ornaments in the room.
To give the living room a real character, spotlights can be used to bounce light off walls, mirrors, and architectural features.At the push of a button, you can create a number of moods to suit different occasions.On cold, dark winter nights, carefully composed lighting can transform a living room into a warm, cozy retreat.You can switch from bright and fresh to subtle and snug at the turn of a dial with a dimmer switch.
Downlights strategically positioned can highlight artworks and photographs and display the contents of shelves and cabinets at their best.
Using downlights for task lighting, such as for reading or when you're tackling paperwork, means you can achieve precisely the lighting levels you need without losing valuable space to floor lamps and cables.
Different cones of light are available for different uses, with a range of beam angles.The more floorspace is illuminated, the wider the angle.If you use downlights with narrow cones, you will create unattractive spots of light on the floor.A narrow cone of light is ideal for task lighting as it won't affect other people in the room.
Kitchen downlights have become a focal point in the home and can provide a great contemporary feel to your home, or if you prefer a traditional feel you can use an antique style of kitchen downlight.The kitchen is more than just a place to cook, it's become a favourite spot to eat, hang out and spend time with your family.When the lighting is right, all of these uses are greatly improved.
In bright, well-lit conditions, food preparation is easier and more enjoyable.The positioning of your downlights requires careful consideration.When calculating where the light will fall, it's a good idea to include the people in the kitchen.Make sure you illuminate what you are doing, not the back of your head, because you can't cook up a masterpiece with a shadowy work surface.
Less light is needed when chatting or relaxing with a cup of tea and biscuits.If you are doing a jigsaw on the kitchen table, brighter light is a useful option.