Goalrilla Basketball Goal Installation - Part 1 is an easy to follow guide.

Not sure where to start after installing a basketball goal.Not a problem.You can either install it yourself or pay a professional to do it for you.The steps are explained in the following article.

The following videos will show you how to install a basketball goal.

The foundation is the secret to a long- lasting basketball hoop.It is possible to achieve the correct mixture of dry concrete and water.

A thin mixture is not strong enough to hold the pole in place.A mixture that is too thick will make it difficult to fill voids that can't be seen below.How do you get the perfect balance?Let us find out!

The amount of pressure per square inch can be used to determine the strength of a cylinder of concrete.Standardized machines can evenly apply pressure across the surface of a concrete cylinder.

The composition of the mix is what determines compressed strength.You can find a variety of mixes that advertise fast setting, high strength, crack resistant, etc. at any home improvement store.The main difference is that some mixes may have additional ingredients, such as fiberglass, to provide even greater bond strength.

You already know what to get if you have a specific mix.If you are just trying to follow the instructions for your hoop, your standard mix will do just fine.

The bags of concrete mix should be purchased by Goalrilla.The concrete is in line with the standard specifications for concrete.

If the installation gets a little messy, it is a good idea to have an extra bag or two on hand.It is very easy to accidentally tear a bag open when moving concrete mix.

Once you have everything you need, open 1-2 bags and pour them into a container.Water should be added according to the instructions.

For 80 lbs.For a 60 lbs. bag, you will want to use 6 quarts or more of water.You should use 4 quarts or 1.9 quarts per bag of concrete.If you don't have a measuring bucket, you can use a 2 L soda pop bottle.

Add water to the depression in the center of the dry mix.Ensure consistency by working the mix with a hoe or other tool.Concrete should be wet but firm enough to hold its shape and consistency.Pick up a few while wearing gloves.

If you allow the mix to sit for extended periods of time, you run the risk of letting it dry out.Move the mix to the hole as soon as possible to alleviate any voids.An extra set of hands will be helpful here.

Adding more water to the mix may be necessary on hot days.Ensure the mix maintains its consistency by keeping it moving.

It is possible to install a basketball hoop in the winter.If the outside temperature is below 40 F (4.44 C) for an extended period of time, you will want to rethink your install date.All sorts of problems can be caused by temperatures below this threshold, and your average installer is most likely not equipped to handle them.

If you choose to pour concrete in the winter, there are a few things you and your installer will want to remember.

Some professionals use other methods or tricks to set concrete in cold weather.It may be better to hire a professional to do the job as they will have the necessary supplies on hand.

It may be better to have someone else do it if you have to work in the cold.

The hole should be 16 inches in diameter and 48 inches deep.You will need concrete for the job.

It's a good idea to call your local utilities to rule out buried cables before you dig.Failure to do so could result in death or serious injury.

The Goalrilla Anchor System should be independent of your court.Add an expansion joint if you are pouring both at the same time.

The anchor system needs at least 72 hours to cure after it is set in concrete.Goalrilla is famous for its rock-solid performance so we recommend putting your system on Day 5.

Are you not feeling up to the job?Hire a professional to install your basketball hoop.Although some businesses might offer basketball goal installation, we recommend contacting a Goalrilla installation specialist.Installation of a goal requires precise and specialized processes to operate at peak performance.Goalrilla specialists know how to do this better than anyone else.

If there is an authorized Goalrilla Platinum Dealer in your area, you should take the first step.Goalrillas are sold through a network of full service dealers, and they can help you find the best goal to purchase, as well as install it.Every year, these dealers install hundreds of Goalrillas, and know our exact specifications, so you can be confident that they will get it done right.

If you live in a more remote area, you may not have a Goalrilla dealer nearby.You could purchase your Goalrilla online.If you do a search on the internet, you will find a good place to start.

If you don't have a local Goalrilla dealer in your area, you may consider contacting a general contractor.Some places to start can be found through a simple search for basketball goal installers.You may want to direct this service provider to our installation guide to make sure they have the correct information for a successful installation.

If you are paying someone to do the installation, you should expect professional quality.Installation costs should range from $400 to $600.If you are working with an installation company, be sure to get a couple different quotes before committing to a purchase.

If you are considering a service provider that is not a Goalrilla authorized dealer for the installation of your basketball goal, you may want to ask the following questions.

This is the most important question to ask when evaluating an installation.If someone has not done many other installations, you probably don't want to be their first guinea pig.Most professional installers have a gallery on their website.It's a good idea to check if they have a Facebook or other social media page where these photos are posted.

A full in-ground system is a multi-step process.The first day involves digging a hole and installing concrete, followed by 3 days for the concrete to cure and then final assembly of the goal.The concrete installation and the assembly of the goal should be covered in the quote you receive.

During the spring and summer months, most installers have multiple projects running at the same time.You won't be the only project on the schedule.

It's a good idea to find out when the installation will start and when it will be completed before committing to it.The installation for any Goalrilla will take at least 4 days, and a particularly busy installation schedule may delay your install date even further.Make sure your chosen installer can install your goal in a way that works for you, so you can start playing as soon as possible.

Installation may take more than 4 days depending on the weather.The curing process for concrete takes 3 days to cure in warm temperatures, so when the mercury drops, it can take much longer.It will be almost impossible to dig a hole if the ground is frozen.

There are more on cold-weather installations here.Discuss these conditions with the installer.

A bungled installation can cause a lot of problems for you and your family.If there is an error in installation, it's a good idea to check with the installer to see what their warranty policy is.If you can, make a note on the specifics of the warranty and get a copy.Take pictures and notes if something seems wrong after the installation.

Accidents happen and when there is a large steel pole or backboard involved, the severity of some accidents can quickly escalate.You could be held responsible if an independent contractor gets injured while doing an installation on your property.

It's important to hire a professional from a good company for this type of project.You don't have to worry about a lawsuit if you have insurance from a well-known company.Before agreeing to any installation, be sure to ask about the certificate of insurance for general liability.

There are additional steps you need to take before an installation can begin.The utility lines need to be marked.Since there is a 4-foot deep hole that must be dug at the installation site, you and the installer need to be aware of any buried cables.The cables should be marked at least a few days before the dig date.

If you purchase your goal from a Goalrilla authorized dealer, they will likely deliver the goal themselves for you, as well as having the area around the installation mowed, the driveway free of any cars, toys, or other debris.

If you need to be present for the installation, be sure to ask the installer.Being on-site during installation can help to resolve any questions that may arise.

There are a few final clean-up notes to consider after the goal is installed.Ask how the dirt will be handled.Agree on where the excess dirt will be placed if you want to reuse the dirt.A request to have the dirt placed on the side of the house or in a designated corner in the backyard shouldn't be a problem.

If you purchased your goal online, it will be delivered on a pallet.Ask if your installer can dispose of this pallet as well.

Are you not feeling up to the job?No problem.You can get help from our list of Goalrilla basketball goal installers.

Goalrilla offers in-depth articles covering questions you may have, helpful tips, and inspiration to get the most out of your basketball hoop.

Related Posts:

1. Concrete Calculator - How much concrete do I need?
2. How much does a concrete slab cost per foot?
3. How to Mount a Basketball Hoop on a Garage (Step-by-step) is one of the reviews on Amazon.com.
4. PDF Average Weight (psf) of Completed Walls using Concrete. Material WeightsDensity Of Concrete - How Much Does Concrete weigh?Nominal Weight of Standard Concrete...