In general the length to choose for gas struts is about 55% of the height of the door you are trying to keep open. So if you have a door that is 1000mm in height a 550mm long gas strut would be about right. In simple terms we are talking half the door height plus a bit when determining optimal gas strut length.
How do you measure gas struts to replace?
Co-Mac's gas strut length is measured from the centre of the ball joint at each end. If you want to replace an existing gas strut, measure the length of your strut from the centre of each ball joint. If your gas strut does not have ball joints, measure the length of the gas strut with no end attachments.30 oct 2019
What is gas strut window?
The Gas Strut is a highly functional and unique option, perfect for kitchen servery areas or for spaces that need as much access as possible. The Gas Strut window opens to 90 degrees allowing for cool breezes in summer to flow through into your home. ... To close, you can either go to the outside and pull the window down.23 sept 2020
What is a gas strut used for?
Gas springs, or gas struts, are rods that provide support for doors, hatches, lids and covers that are horizontally hinged. They act as support in a variety of ways including, lifting, positioning and lowering; because of this versatility they are used in a wide range of applications.20 abr 2014
How do gas strut windows work?
The Gas Strut window opens to 90 degrees allowing for cool breezes in summer to flow through into your home. ... Due to its design, the Gas Strut can be placed ontop of a bench without the need for holes to be cut as the locking system is fixed to the sides of the frame.23 sept 2020
How do gas strut positions work?
Gas struts, also known as gas springs, provide direct support for safely lifting, positioning, lowering and counterbalancing weights. ... Camloc gas struts work by forcing, under pressure, an inert gas (Nitrogen) into a cylinder. The internal pressure then greatly exceeds atmospheric pressure.
How are struts measured?
Measure the exposed Rod length from the Barrel to the centre of the End Fitting. To establish the FORCE of the Strut ( Newton Metres ) look on the Strut Label or Branding for a Number followed by the Letters Nm or N. ... (eg ) 450 Nm or 450 N.