How can I find my sprinkler lines without digging?
How can I find my sprinkler lines without digging?
If you prefer to locate the lines and heads of your system without digging, rent a valve locator or even a metal detector and mark areas once found - better yet, call call 811, a federally mandated service, and ask someone to come out and locate the system for you.
How far down are sprinkler lines?
Basic Depth Requirements In most areas, burying the pipes 8 to 12 inches below the surface is adequate. This measurement is from the top of the pipe to the surface of the soil, which means your trenches must be slightly deeper to accommodate the pipes.
How do I find out where my sprinkler lines are?
You can tell (roughly) where the pipes will be for that zone by finding the shortest path from the valve box that connects all the sprinklers in a zone. As long as you dig carefully, you shouldn't have too much trouble. The pipes are usually pretty tough and are usually buried about a foot or so under the ground.
How deep are sprinkler lines buried?
Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area's freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.
How deep are residential sprinkler lines?
Dig for Your Sprinkler System The trenches will be relatively shallow, usually 6 to 12 inches deep, depending on your area's freeze cycles and frost severity. The trench must also be deep enough to allow the sprinklers to retract underground to prevent breakage from lawn machines.