Blink's original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
Why won't my blink camera connect to my wi-fi?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
How do I reconnect my blink camera?
One of the ways is trying to reconnect your Blink camera to the Blink camera application. The Blink Sync Module can be reset and rebooted to setup mode by pressing and holding the reset button until a red light shows. This process usually takes between 15 seconds to half a minute.May 5, 2020
How do I reset my Blink wireless camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module's side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.Oct 29, 2020
Do all Blink cameras have to be on the same WiFi?
Blink cameras can't operate offline and require a 2.4 GHz Wi-Fi Internet connection. Wi-Fi is also important for Blink cameras that need to connect to a Sync Module on the same Wi-Fi network. ...
Does Blink work if WiFi goes out?
Blink cameras can't operate offline and require a 2.4 GHz Wi-Fi Internet connection. One important reason is because cameras use Wi-Fi to send images and notifications. Blink systems minimally require a high speed connection of at least 2 Mbps upload speed.
Do all blink cameras have to be on the same WiFi?
Blink cameras can't operate offline and require a 2.4 GHz Wi-Fi Internet connection. Wi-Fi is also important for Blink cameras that need to connect to a Sync Module on the same Wi-Fi network. ...
How do I reset my blink wireless camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module's side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.Oct 29, 2020