Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.2018-12-11
How do I unclog my LG Inverter Direct Drive dishwasher?
- Unplug the dishwasher.
- Remove the lower front panel.
- Disconnect the hose from the drain pump.
- If a clog is visible at either end of the hose, carefully remove it with a straightened wire hanger.
How do I reset the OE code on my LG dishwasher?
First, inspect the drain hose for a clog or bend. Second, inspect the dishwasher drain pump for any blockages in the pump housing assembly. Clean any and all blockages and the OE error code should clear.2017-03-15
How do you force a dishwasher to drain?
- Step 1: Prepare Your Dishwasher. ...
- Step 2: Make Sure Your Dishwasher is Turned Off. ...
- Step 3: Remove the Stagnant Water With a Towel. ...
- Step 4: Perform a Check On the Drain Hose. ...
- Step 5: Remove Drain Hose and Clean. ...
- Step 6: Check Dishwasher Drain.
Which button drains the dishwasher?
Most dishwashers have a "Cancel" or "Drain" button or option. Sometimes this will be two buttons pressed at the same time, which should be noted on the control.
How do I force my LG dishwasher to drain?
Force the Drain. This is activated by pressing and holding 2 buttons simultaneously e.g DELICATE + DUAL CONTROL. The 2 buttons may vary depending on your model. If your model does not have a CANCEL & DRAIN option, start a cycle, let it run for 45 seconds, then power the unit off.2018-12-11
Why is there water in the bottom of my LG dishwasher?
If your dishwasher leaves dishes wet, along with a puddle of dirty water, a clogged filter could be to blame. A dishwasher filter screens out larger food particles and debris to prevent drain clogs. However, if the filter's screen becomes clogged with this debris it can block water from draining.