How do I fix a loose shower handle?

Rust, discoloration and leaks can be caused by years of wear on bathroom fixtures.Years of use can lead to loose shower knobs.There is a way to fix a shower knob with a couple of tools.You can replace a damaged knob or handle with a series of steps.The screw that holds the handle together can be tightened.

There are many factors that contribute to loose shower knobs.It can damage the threads of the valve stems.A damaged valve stem leads to a loose knob.The best way to get rid of a loose knob is to tighten the screw that holds it in place or replace it.

If there is a loose shower knob, tighten the screw first.If you want to get to the screw, you have to remove the metal covering at the center of the handle.Once you've found the screw, tighten it with a wrench.

Are you still loose?The knob or handle may need to be replaced.The shower water shutoff valve is located behind the tub or shower access panel.The water supply can be turned off if you can't shut off the valve.To get rid of the remaining water, open the shower faucet and let the water drain.

The shower faucet handle needs to be removed with a wrench and screwdriver.What caused the handle to loosen?Is the teeth inside the hole still sharp?The handle should be replaced if not.Is the shaft holding up the handle?If that is the case, tighten it with your wrench.

Remove the shower handle and turn the water back on once everything is in place.

A worn valve stem could be the cause of a loose shower knob.You can use tape to fix it.Wrap the stem in tape and slip the handle over it.One wrap around the stem will solve the issue and add years to the knob.

You may have to place a screwdriver between the handle and wall if you can't remove it.You can place a piece of wood between the wall and the screwdriver to protect it.