- Insert the key into the driver's side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
How do I remove theft mode?
Step 1: Insert the key into the door lock. Use the side door on the driver's side and the physical key even if there is a keyless entry system on the car. Step 2: Turn the vehicle key to unlock the car door without releasing it. Hold the key for 30 seconds in the position.
How do you reset the anti-theft system on a 2009 Ford f150?
To reset the alarm on the 2009 Ford F-150 You will first want to insert the key into the ignition and turn it to the on position. Now cycle the car back to off, remove the key, wait five seconds, then put the key back in and cycle it to the on position. Now cycle it back on and off twice and then remove the key.
How do I start my car after anti theft reset?
Insert the key into the ignition and turn it to the on position, which activates your accessories but not the engine. Leave the key in position for about 10 – 15 minutes. Step 3: Check the anti-theft light again. If it's no longer blinking, turn the key back to the Off position and allow it to set for a minute or two.Jun 3, 2016
How do I disable anti-theft system?
Turn the key to unlock your car door, but don't release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.Jun 3, 2016
How do I get my car out of anti theft mode without remote or key?
- Insert your key into the car's ignition and turn the key to the "ACC" position.
- Locate the transmitter system for your alarm. ...
- Repeatedly press and release the toggle switch on the system.
Where is the anti theft fuse located?
It is usually located on the dashboard by the driver's door, in front of your left knee. You may find the alarm fuse in this fuse box. If you do not find an alarm fuse inside of the car, look in the fuse box under the hood on the driver's side. Your car model may or may not have additional fuse boxes.
Can you disable Ford Pats?
The Ford PATS is one of the top security systems that you might have for your car. ... Disabling the system is tricky and it should be done by an expert to ensure that you can fix the transponder and keep the car safe from theft.Apr 10, 2021
Can you bypass the anti-theft system on Ford f150?
First You will want to hold down the key for 30 seconds in the down position. That will tell the system You have the right key, and it will enable You to be able to bypass the car's alarm system.
How do I stop my anti-theft light blinking?
Insert the car key into your car's ignition and turn it on. The car's accessories will be activated but not the engine. Step 3: Do another check on the anti-theft light. If it isn't blinking any longer, then turn the key over to the Off position and let it sit for a couple of minutes.
What does a blinking theft light mean?
Your car has a built-in anti-theft system. ... The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. Tip. You have to lock the doors of the car (without it running) for the alarm to engage.Dec 15, 2015