- Press 00 on your RV comfort ZC thermostat;
- Switch the thermostat in Off position, remove the fuse for five minutes then plug it in again;
- If the above solutions don't work, disconnect all power from the RV then connect 12V power to fuse.
Is there a reset button on AC thermostat?
Arrow Buttons – Normally, a thermostat has two arrow buttons for resetting the temperature higher or lower. If you adjust these, the new setting is temporary, only lasting until you have reached the end of the previously set program.
How do I reset my Dometic comfort control?
To do a system reset: Make sure the CCC 2 thermostat is in the OFF mode. Simultaneously press the MODE and ZONE buttons. The LCD will display “IniT” and all available zones.2017-03-24
How do I reset my AC thermostat?
- Shut Down Your AC at the Thermostat. ...
- Find Your Circuit Breaker Box. ...
- Reset the Circuit Breaker for Your AC Unit. ...
- Wait 30 Seconds. ...
- Turn the AC Thermostat Back On. ...
- Call Vredevoogd Heating & Cooling for all your Furnace & AC needs.
How do I reset my Dometic RV AC thermostat?
Press the “+” button and, while holding it, also press and hold the On/Off Mode button for three seconds. LCD will show ― ― . Press the On/Off Mode button again to turn system off. This completes the initialization.
Can you reset AC thermostat?
A common way to reset almost any thermostat is to hold down the reset button for 5+ seconds. Alternatively, try resetting battery-powered thermostats by flipping the battery directions around for 5s, then flip them back. If all else fails, switch off the power at the circuit breaker for a couple minutes.
How do I reset my Dometic?
Make sure the thermostat is in the off position. There is a quick reference to control buttons on page 4. While holding the + button, press and hold the On/Off Mode button for three seconds.
How do I reset my Dometic AC thermostat?
Press the “+” button and, while holding it, also press and hold the On/Off Mode button for three seconds. LCD will show ― ― . Press the On/Off Mode button again to turn system off. This completes the initialization.
How do I reset my Dometic digital thermostat?
Press the “+” button and, while holding it, also press and hold the On/Off Mode button for three seconds. LCD will show ― ― . Press the On/Off Mode button again to turn system off. This completes the initialization.