To hard reset your eero, hold the reset button until the LED flashes red (15 seconds), then release it. After a successful hard reset, the eero LED light will reach a flashing blue state, indicating that the eero is ready to be set up again.
What is the button on the bottom of eero?
The eero Beacon reset button can be found on the left side and the same instructions below apply. Before resetting an eero make sure it has been powered on for at least 45 seconds. Soft Reset: A soft reset will clear all network configurations from eero, but preserve its sessions.
How do I reset my eero to factory settings?
- To factory reset from the router, you will need a paperclip. Go to your router, and look at the back.
- Push the button with the paperclip for 15 seconds until the LED flashes red.
- You have successfully factory reset your router. If you would like, you can set up your router again from the app.
How do you put eero in pairing mode?
To do so, make sure the eero is powered on, and proceed to hold down the reset button until the eero blinks red. From there, try adding the eero to the network.
How do I get my eero back online?
If there's an on/off switch, switch it off and wait for 30 seconds before switching it back on. If there is no on/off switch, unplug the modem and wait for 30 seconds before plugging it back in. Wait until the lights on your modem and the LEDs on your eero are done blinking before trying to get back online.
Why is my eero not pairing?
Check that Bluetooth is ON: Make sure Bluetooth is enabled on your phone. You'll use Bluetooth to pair your eero with your account. Power cycle your gateway eero: You can do this by unplugging and re-plugging it. Once you've plugged it back into power, wait for your eero to boot back up.