Go to the App Store on your iOS device or the Play Store on your Android device and download the SkyBell HD app (iOS, Android). Once it's installed, open it up and tap on “Sign Up”. Enter in your email address, create a password, and type in your name. Then tap on “Sign up”.
How do I connect my SkyBell HD to WiFi?
Step 1: Open up the SkyBell HD Application, and select ADD A NEW SKYBELL. Step 2: Select Begin and enter Sync Mode. Step 3: To begin syncing, leave the SkyBell App, launch Settings, and navigate to WiFi. Step 4: Select SkyBellHD_XXXXX, and go back to the SkyBell HD App.
Is there a monthly fee for SkyBell?
The company does not have any monthly subscription fees. These doorbell cameras connect homeowners to their home security system through the use of W-iFi. As a result, homeowners pay a one-time fee to purchase the equipment. SkyBell also offers a few accessories.5 days ago
Does SkyBell need to be hardwired?
SkyBell must function as part of complete circuit, meaning it requires direct power on one side and a wired doorbell (or resistor) on the other. The power must come from a low voltage transformer with 10-36 VAC 10VA. If you do not use a wired doorbell chime, you must use a resistor.
Why will my SkyBell not connect to WiFi?
Check to make sure that your smartphone is connected to the correct WiFi network BEFORE you attempt to sync. You must connect your smartphone to a 2.4 Ghz network BEFORE syncing to SkyBell. Then go back and re-enter your Device ID and WiFi password. Then make sure SkyBell is still in the blinking red mode.
How do I reset my SkyBell to a new WiFi?
You can perform a Factory Reset in the following way: Press and hold the SkyBell button for about a minute. The LED will flash Green rapidly, then flash alternating Red/Green, then flash Blue rapidly, then flash Yellow rapidly.
How do I reconnect my SkyBell?
https://www.youtube.com/watch?v=WSve9Z5ft14
How do I reset my SkyBell HD?
Hard Reset - Hold the SkyBell LED (main button) down for approximately one (1) minute. The SkyBell will rapidly blink green and then blink Red/Green. Have the customer continue holding the button until the LED goes from rapidly blinking blue to rapidly blinking yellow. Now the customer can release the button.
How do you wire a SkyBell doorbell?
https://www.youtube.com/watch?v=roxKcj4kn2I
What does SkyBell work with?
SkyBell is designed to work best with B, G and N wireless network formats. SkyBell only works with the 2.4 ghz band. If you have a dual-band router, you must segregate the 2.4ghz band and create a unique SSID for the 2.4 ghz network.
Can a SkyBell work with a wireless chime?
The SkyBell DDA enables users to remotely control the indoor digital doorbell chime through use of the SkyBell mobile app, (Android or Apple iOS). Users may use the mobile app to turn-off, or turn-on the chime whenever it is convenient like a 'Do Not Disturb' type function.