- Step 1: Level house. Make sure your home is level before anchoring it to the ground.
- Step 2: Check charts. ...
- Step 3: Determine soil type. ...
- Step 4: Select anchors. ...
- Step 5: Select hook-up. ...
- Step 6: Locate wires/cables. ...
- Step 7: Position over-the-top tie-downs. ...
- Step 8: Install anchor.
How is a modular home attached to the foundation?
On-frame modular homes have a permanent steel-beam chassis. Off-frame modular homes are lifted by a crane off the transportation carrier and placed on a foundation. Both can be placed on permanent foundations.
How many tie downs does a manufactured home need?
The number of diagonal tie downs range from three to five per side in less storm danger areas. In coastal areas, four to seven per side are used to serve the greater need. For single-wide homes, vertical ties (on the roof area) required are two to four, depending on the length of the home.
How are manufactured homes tie down?
- over-the-top tie-downs, which are straps that are placed over the siding and roof. Some manufactured homes come equipped with concealed over-the-top tie-downs, which are located just under the exterior siding and metal roof. ...
- frame anchors. These straps attach to the home's frame rails.
Are tie downs required on a manufactured home?
Manufactured homes must have anchors and tie-downs to keep them in place during high winds. ... Wind can get under the homes and lift them up. In addition, the wind passing over the top of your manufactured home can create an uplift force. To resist wind forces, you need two different types of tie-downs.
How far apart are mobile home tie downs?
between 5-6 feet apart
How is a manufactured home tied down?
Anchors are driven into the ground to hold your home down against wind forces. They go into the ground first and then steel straps are attached. The straps connect the anchors to a main I-beam on your home's steel frame.
What is the purpose of tie downs on a manufactured home?
Tie-downs are crucial when it comes to the safety of any manufactured home. Because manufactured homes are very lightweight, strong winds are more likely to get under and lift the home. If your mobile home is not tied down, it could get rolled or flipped in a tornado or severe windstorm.Apr 20, 2020
Do modular homes have tie downs?
Modular homes are built in a factory and then delivered to a homesite for installation, similar to a manufactured/mobile home. But there is usually no steel undercarriage, and definitely no wheels for transportation.Jun 20, 2018
When did mobile home tie downs become required?
In our area, located in Wind Zone II, homes manufactured after the original HUD standards went into effect in July, 1976 and before the upgraded standards enforced beginning in July, 1994, had tie-downs spaced approximately eight feet apart on average. After 1994, tie-downs are placed approximately five feet apart.Oct 2, 2018
Do manufactured homes need tie downs?
Manufactured homes must have anchors and tie-downs to keep them in place during high winds. Compared to site-built homes, manufactured homes are relatively lightweight.