- Connect the pressure bleeder to the master cylinder reservoir.
- Turn the ignition on.
- With bleeder screws closed, pressurize the system to 35 psi.
- Select the “Automatic Bleed Procedure” on the scan tool. ...
- Relieve pressure at the bleed tool and remove it from the master cylinder.
How do you bleed the ABS module on a 2003 Chevy Silverado?
https://www.youtube.com/watch?v=7UTmCn1rvTw
Do I need to bleed my ABS module?
If you felt that the brake pedal is so spongy or soft, then this is the first sign that your ABS module and the whole braking system needs to be bled to get rid of the excess air that in the brake system. This may occur some problems to the ABS system or it may get weaker.Aug 15, 2021
How do you manually bleed ABS module?
Start with the one toward the engine. Turn the ignition on and apply light pressure on the brake pedal. Open the bleeder screw and allow the fluid to flow until clear. Close the screw and do the same at the second bleeder screw.
How do you bleed the ABS module?
Turn the ignition on and apply light pressure on the brake pedal. Open the bleeder screw and allow the fluid to flow until clear. Close the screw and do the same at the second bleeder screw. Depressurize the accumulator by pumping the pedal 40 times with the key off.
How do you bleed ABS module without a scan tool?
- Step 1: Get ready.
- Step 2: Release brake fluid and change new oil.
- Step 3: Loosen Bleeder.
- Step 4: Get someone's help.
- Step 5: Pour new liquid into the cylinder.