Estimate the density of the hotmix to be used. Standard density for asphalt is 145 lb/ft3 (2322 kg/m3). Multiply the volume by the density (in the same units) to get the weight.
What is the weight of asphalt?
Concrete and asphalt weights are based on the square footage and thickness of the material. On average, a cubic yard of solid concrete weighs 4,050 pounds (~2 tons), or 150 pounds per cubic foot. Solid asphalt weighs slightly less at 3,960 pounds per cubic yard.
How do you calculate asphalt yield?
The theoretical area yield will be the number of tons of asphalt divided by the maximum compacted unit weight in the laboratory. For example, if you have 20 tons of asphalt, then you have 40,000 lbs of asphalt, with say, a laboratory unit weight of 135 lbs/cubic foot. That will yield 296 cubic feet of asphalt.Jul 4, 2006
What does 1 cubic meter of asphalt weigh?
2.5 tonnes/m3
What is a yield in paving?
The yield is the amount of material being used in a set area. It's important to know so you can keep track of where you are during paving, how much material you have at any point in time, and how much material you may be wasting or running low on.
How many tons is 2 yards asphalt?
Typically, 1 cubic yard of Asphalt yields 1.95 short tons, for 2 cubic yards, it will yield about 3.9 short tons, for 3 cubic yards, it will yield about 5.85 short tons, for 5 cubic yards, it will yield about 9.75 short tons and for 10 cubic yards, it will yield about 19.5 short tons.
How many tons is 2 yards?
Cubic Yard [yd^3] Ton Register [ton Reg]
----------------- ----------------------
2 yd^3 0.54 ton reg
3 yd^3 0.81 ton reg
5 yd^3 1.35 ton reg
10 yd^3 2.7 ton reg
How much does 1 cubic meter of aggregate weigh?
Weight of aggregate per cubic meter:- density of aggregate is ranging from 1420 Kg/m3 to 1680 Kg/m3,so weight of aggregate per cubic metre is vary from 1420kgs to 1680kgs. 20 mm aggregate density:- density of 20 mm aggregate is 1550 kg/m3, it means 1 cubic metre of 20 mm aggregate weight is 1550 kg.
How do I convert yards to tons?
To convert Cubic Yards to Tons*: Cubic Yards x 1.4 = Tons.
What is the density of asphalt concrete?
Standard density for asphalt is 145 lb/ft3 (2322 kg/m3).
How do you calculate asphalt?
- Use a tape measure to determine distances.
- Convert the length, width and height measurements to feet by dividing by 12, since each foot contains 12 inches.
- Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved.
How do you convert cubic yards of dirt to tons?
- Convert your density to lb/yd3.
- If you're in the US, divide 2295 by 2000 (there are 2000lb in a US ton).
- You now have your answer in tons per cubic yard (1.15 US tons or 1.04 metric tonnes)
How do you convert tons of asphalt to cubic yards?
Therefore 2.4 ton of asphalt = 1 cubic meter. 1 cubic yard of hot asphalt mix weighs 2.025 tons or 4050 lbs. These measurements are an approximation and therefore when you are ordering the quantity ensure that you add more asphalt to gather for the waste and you don't run short as you do your pavement project.
How much does 1m3 MOT Type 1 weigh?
How do you figure cubic yards of asphalt?
Multiply Volume by the Density To determine how much asphalt you will need for the project, multiply the area's cubic feet measurement by 148 PCF.
How many cubic yards are in a ton?
Ton Register [ton Reg] Cubic Yard [yd^3]
---------------------- ------------------
1 ton reg 3.7037037037 yd^3
2 ton reg 7.4074074074 yd^3
3 ton reg 11.1111111111 yd^3
5 ton reg 18.5185185185 yd^3
How do you run an asphalt yield?
https://www.youtube.com/watch?v=zzYFKbAg__U
How many tons are in a yard?
Cubic Yard [yd^3] Ton Register [ton Reg]
----------------- ----------------------
1 yd^3 0.27 ton reg
2 yd^3 0.54 ton reg
3 yd^3 0.81 ton reg
5 yd^3 1.35 ton reg
What's the formula for calculating asphalt?
Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved. Performing this step yields 12.5 feet times 8.33 feet times 0.42 feet or 43.7 cubic feet.
How do you figure square yards for asphalt?
- First, you need to obtain the square measurement using a tape measure.
- Second, you determine the dimension of the yard in cubic meters and multiply by the depth.
- Third, you get the volume of the yard and multiply by the density and then change the cubic meter to ton asphalt.
How many Cubic Yards are in a ton of fill dirt?
How much is a ton of soil? A ton of condensed soil is typically about 0.750 cubic yards (3/4 cu yd), or 20 cubic feet.
How many tons is a yard of granular?
Regarding this, “how many tons in a cubic yard?”, in United State, 1 ton or simply tonnes is around 2000 pounds and generally for estimating purpose 1 yard of gravel weighs around 3000 pounds, so tons in a cubic yard = 3000/ 2000 = 1.5 tons, therefore, there are 1.5 tons in a cubic yard.
How do you calculate asphalt tonnage?
- Step 1: Measure your pathway.
- Step 2: Convert the measurements to feet.
- Step 3: Multiply the measurements to cubic feet.
- Step 4: Multiply the weight density of asphalt with the volume figure.
- Step 5: Covert the amount to tons.
How do you calculate asphalt weight?
Multiply Volume by the Density To determine how much asphalt you will need for the project, multiply the area's cubic feet measurement by 148 PCF. For example, if the area is 40 cubic feet, then the formula is: 40 cubic feet x 148 PCF = 5,920 pounds of asphalt mix.