Plug the charger cord directly into an electrical outlet. 110–120 V 60 Hz electrical outlet. Charge the battery only with the charger supplied with the drill. Do not use the charger in wet or damp conditions.
How do you charge a portable drill?
Connect the positive terminal of the voltage source with the car battery's positive terminal and the negative terminal of the voltage source with the car battery's negative terminal and turn on the power source by plugging it in a power outlet. You will have to wait a couple of hours before it's fully charged.
How do you charge a 18 volt battery?
- Connect the input jack from your charger to the 18 volt battery or insert the battery into the charger, depending on the type.
- Plug in the charger to the electricity supply and turn the charger on.
How do I know if my battery or charger is bad?
A negative reading will indicate a bad battery charger, and you should replace it. If the charger has sufficient amount of power flowing through it, it's more than likely the batteries are bad and just won't hold a charge.
How do I know if my drill charger is working?
Touch the meter's black negative probe to the remaining metal terminal in the base of the charger. Read the meter. A properly functioning charger will produce a reading on the meter within a few tenths of a point of the voltage capacity of the battery. If the meter does not produce a reading, the charger is faulty.
Do cordless drill batteries go bad?
Cordless tool batteries last for several years; and with proper care and storage, you can extend battery life and your investment.
How do you test a power tool battery?
- Plug the battery in and charge it for at least an hour.
- Touch the multimeter probes to the two battery terminals.
- Check the voltage indicator on the multimeter.
- If the voltage indicator is at or below the voltage rating on the battery, the battery needs to be replaced.
How do you charge a drill battery with a different charger?
Charging battery with another drill battery For example, if you have another drill battery with a working charger, you can use that drill battery to charge your battery. Again, science is the same. Make sure the other battery is of the same voltage and fully charged. Now connect the terminals in the same polarity.
Are 18V battery chargers interchangeable?
Please enter a question. Answer: All RIDGID 18V platform tools and batteries are interchangeable. The only restriction is that RIDGID 18V Lithium Ion batteries do require their correct charger, they are not compatible with older RIDGID NiCad battery chargers.
Are 20V battery chargers interchangeable?
Answer: Yes, all of our 20V BLACK+DECKER batteries and chargers are interchangeable within our 20V BLACK+DECKER product line.
How do I get my drill battery to charge again?
https://www.youtube.com/watch?v=wGwyB4sFTYM
Can you use a regular battery charger on a lithium battery?
You can use a lead acid charger on a lithium battery if you want, HOWEVER, you must NOT use a lead-acid charger if it has an automatic “equalisation mode” which cannot be permanently turned off.
How can I charge my battery without a charger?
- Keep an auto repair kit in your trunk.
- Take the jumper cables out of the kit.
- Keep your cell phone charged in case of emergency.
- Turn your keys to the "off" position.
- Place your negative jumper cables on the battery terminals.