How do you install a 3/8 wedge anchor?

How do you install a 3/8 wedge anchor?

https://www.youtube.com/watch?v=3JI_9ggbmcY

How deep should the hole be drilled for a wedge anchor?

1/2”

What size drill bit do you use for a 3/8 bolt?

Most drill charts recommend a 5/16 drill for a 3/8-16 bolt. Cutting holes that are smaller will leave more material for the tap to cut out, risking tap breakage.

How strong is a 3/8 wedge anchor?

Size Minimum Embedment Shear (lbs.) ---- ----------------- ------------ 3/8” 1-1/2” 3238 1/2” 2-1/4” 5564 5/8” 2-3/4” 6198 3/4” 3-1/4” 9378

What size bit do I need for a 3/4 anchor?

1”

What size drill bit do I need for a 3/8 wedge anchor?

1. Drill hole into the concrete using a carbide tipped bit. Bit size = 3/8” (same as anchor diameter) Drill the hole at least 1/2" deeper than the length of the anchor.Oct 23, 2014

How do you drill a wedge anchor?

https://www.youtube.com/watch?v=DStVH-kg9ho

What size hole do you drill for a 1/2 wedge anchor?

Size Minimum Embedment Drill Bit ----- ----------------- --------- 5/16” 1-1/8” 5/16” 3/8” 1-1/2” 3/8” 1/2” 2-1/4” 1/2” 5/8” 2-3/4” 5/8”

What size hole do I drill for a 3/8 concrete anchor?

Bit size = 3/8” (same as anchor diameter) Drill the hole at least 1/2" deeper than the length of the anchor. 2. Clean out the hole using a wire brush, compressed air, vacuum, blow out bulb or other method.Oct 23, 2014

What size hole do I drill for a 3/16 concrete anchor?

5/32”

What size hole do I drill for a 1/4 concrete anchor?

Drop-in Anchors - for use in concrete only The hole to be drilled = the same diameter of the outside of the anchor. Carbide tipped drill bits (meeting ANSI standards) must be used. The hole needs to be drilled 1/4" deeper than the anchor will penetrate.

Related Posts:

  1. Concrete Calculator - How much concrete do I need?
  2. How much does a concrete slab cost per foot?
  3. PDF Average Weight (psf) of Completed Walls using Concrete. Material WeightsDensity Of Concrete - How Much Does Concrete weigh?Nominal Weight of Standard Concrete...
  4. What kind of drill do you use to drill into concrete?