Use the water pump pliers to detach the kitchen faucet from the water line. Although other improvised tools might work, it is recommended you use water pump pliers instead to help avoid damage. Gently fasten the water pump pliers to the water line and pull off each line with care.
How do you get plastic nuts off the bottom of a faucet?
Whether you use a basin wrench or a hammer and screwdriver, the nut is easier to loosen if you heat it with a hairdryer. The heat should soften the plastic and make the nut pliable enough to break free. It also helps to spray some calcium dissolver on the nut and wait several minutes before tapping or twisting.Sep 20, 2020
How do you loosen a tight faucet nut?
- Tighten the nut. Moving the nut in any direction is progress. ...
- Tap with a hammer. Jarring the nut can break its bond to the bolt. ...
- Apply heat. Metal expands slightly when hot, which may be enough to crack the nut free. ...
- Soak the nut.
How do you get a faucet nut off?
https://www.youtube.com/watch?v=2vJnw2rRj9o
How do you loosen a hex nut on a faucet?
You can usually loosen a corroded hex screw by using penetrating oil and a bit of force to lubricate and break the mineral deposits on the screw. Once the screw is lubricated, you can usually remove it with an Allen wrench.
What size wrench do I need for kitchen sink?
A basin wrench is a self-tightening wrench used to repair and replace old faucets. You could buy a couple in different sizes, or you can get one with a telescoping shank that goes from 10 to 17 inches with a head that adjusts from . 75 to 1.75-inches. This wrench is essential for replacing kitchen faucets.
What size is a basin wrench?
Box spanner basin wrenches come in a wide variety of sizes depending on your needs. However, the most common sizes match the typical sizes of nuts used in plumbing fixtures and pipe fittings: 8mm, 10mm, 15mm, 22mm, 28mm, 32mm, and 38mm etc.
What is a sink wrench called?
A basin wrench, sometimes called a sink wrench, is a plumbing tool which is used in confined spaces to turn fasteners that would be difficult or impossible to reach with a plumber wrench or other types of wrenches.
Is there a special wrench for faucets?
A basin wrench is a specialty plumbing tool that nearly all professional plumbers own—and one that every homeowner who does DIY plumbing work should own. The tool is designed to do only one thing—to install or remove a faucet—but it does that one thing better than any other tool.Nov 11, 2021
What is a plumbing wrench called?
The Stillson wrench, or Stillson-pattern wrench, is the usual form of pipe wrench, especially in North America. ... Another type of wrench often used on pipes, the plumber wrench, is also called a pipe wrench in some places. The Stillson wrench is an adjustable wrench (spanner) with hardened serrated teeth on its jaws.