A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
Can you substitute bleach for pool shock?
Due to the lack of bleach products on store shelves, some of our customers have asked us “Is there a difference between common store brands of bleach and swimming pool shock for disinfecting surfaces, and can they use pool shock to clean surfaces?” Answer: Yes, you can use pool shock instead of Clorox, but dilute it 23 Mar 2020
Can you use baking soda instead of pool shock?
Fortunately, there is a simple and cost-effective way to maintain your pool's alkalinity and pH. You might use it in your cookie recipes or to freshen your fridge. This handy tool for pools is none other than Arm & Hammer baking soda, although you'll need pounds of it rather than a pinch.
What can I use instead of shock for pool?
Shock. Common unscented household bleach (sodium hypochlorite) works well to shock a pool. To increase the chlorine level by 5ppm in a 10,000 gallon pool, you would need 1/2 Gallon of basic household bleach.7 May 2020
How do you shock a pool naturally?
Fill your pool with water. You can use water from the hose that is chlorinated. Chlorine & hydrogen peroxide can mix together just fine. To start treatment, shock your pool with hydrogen peroxide by adding 250 ml (1 cup) of hydrogen peroxide for every 1000 liters (250 gallons) of water.26 Jun 2016
Can you add shock directly to pool?
You can add some granular pool shock to your swimming pool directly, but most varieties need to be mixed with water before use. Mix the granular pool shock with water ahead of time, if necessary.
How much does it cost to shock your pool?
A pool owner will pay approximately $25 to $50 for a pool shock. Shocking involves adding chlorine or non-chlorine chemicals into the pool to raise the “free chlorine level” where algae, chlorine, and bacteria are destroyed.24 Mar 2021
What is the best shock to use in my pool?
- BEST OVERALL: HTH 52028 Ultimate Shock Treatment Swimming Pool.
- BEST BANG FOR THE BUCK: DryTec Calcium Hypochlorite Chlorinating Shock.
- BEST POWDER: Zappit 73% Cal Hypo Pool Shock.
- BEST LIQUID: Austin's 000176 Pool Tech Shock Gal.
- BEST TABLET: HTH 42033 Super 3″ Chlorinating Tablets Swimming.
What is stronger bleach or pool shock?
Swimming pool shock contains 12.5% sodium hypochlorite (bleach) vs. 6-8.5% for Clorox (bleach). At a 12.5% concentrate, liquid pool shock is approximately 2x's stronger than Clorox bleach. The CDC recommends 5 tablespoons of regular bleach per gallon of water to properly disinfect a surface.23 Mar 2020
Can you put too much shock in a pool?
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool. It's likely to do that regardless of if you overshocked the pool or not.
What is the best type of shock?
Calcium Hypochlorite Calcium Hypochlorite, or cal-hypo, is the most powerful and fast-acting shock available. This popular shock method dissolves quickly and is unstabilized. Unstabilized shocks burn off from the sun's UV rays and does not increase cyanuric acid levels.19 Apr 2018
Can you use pool shock instead of chlorine?
SKIMMER NOTES: No. Chlorine and shock are not the same thing. Shock has a more intense chemical strength than the traditional chlorine sanitizers, and it also differs in how you should apply it to your swimming pool. Short answer: No. Chlorine sanitizers and shock are similar but different in strength.
Is shock stronger than chlorine?
Using Liquid shock or liquid bleach regularly will increase your pH so make sure you keep an eye on your pH and alkalinity levels. Granular Shock: Granular or powdered oxidizers 4 types and 6 strengths. This type of shock is much stronger than liquid shock typically has 65 to 75 percent available chlorine.6 Apr 2015
Do you shock or chlorinate a pool first?
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.22 Jan 2020