Hold the key in the open position and turn the knob to the right to open the door. NOTE: This key has also been provided in case you lose or forget your security code or if the batteries run low. If you lose the key, you'll need to reference the serial number located under the removable lock cover to get a replacement.
How do you open a pen and gear digital safe without the key?
Insert a knife into the keyhole and shake it to pop the lock open. If your digital safe has a keyhole, stick the pointed tip of a sturdy knife into it. Shake and wiggle the knife to force the locking mechanism to disengage. Then, open the door of the safe.
How do I reset my pen gear safe?
NOTE: The reset button located on the inside of the door is covered with a removable cap. When you use the reset button while setting your own combination, remove the cap to access the button. Use a pen tip to push the reset button. Replace the cap securely over the reset button after setting your combination.
Are digital safes easy to break into?
How to Break Into a Digital Lock Safe. A digital lock safe uses a keypad instead of a dial. This type of safe is harder to crack, especially by a burglar without safe cracking tools. However, if your safe has a reset key, the burglar's job becomes a whole lot easier.
How do I program my digital safe?
- Enter your code on the keypad located on the front of the safe. ...
- Turn the handle to the right within five seconds of correctly entering the code. ...
- Open the safe with a key. ...
- Enter your code to open the safe.
- Place the electronic digital safe into code reset mode.
How do I reset my small digital safe?
Place the electronic digital safe into code reset mode. On some models you need to hold the last digit of the code or press the "*" button to get into code reset mode. Other safes require you to open them and press a small red button on the inside of the door.