hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
How do you test a scissor lift battery?
https://www.youtube.com/watch?v=NAL5CPN251s
Where is the tilt sensor on a scissor lift?
For Boom models, the Tilt Switch is mounted inside the base control console. Check the parts manual for your model of vertical mast, scissor, or boom lift to identify the correct Tilt Switch part number, as well as where it's mounted on the machine.
How do I know if my scissor lift is charging?
Confirm the Charger Is Working Look at the scissor lift's battery charger and verify its light is illuminated. Once a lift is fully charged, the light will typically turn green. At this point, the charger will automatically shut off, too.
How do you release the brake on a scissor lift?
https://www.youtube.com/watch?v=SAz4W1d3mko
How do you raise a scissor lift?
Push the joystick forward to raise the scissor lift. With the switch in the left-most position, push the joystick forward to raise the platform. If you want to stop moving the platform, move the stick to the center to stop raising the platform.
Why won't my scissor lift go down?
Step 1: Check the power supply to your lift (including all cables, the actual power switch and all of the fuses). ... If you hear a clicking noise, the velocity fuse is locked. Step 4: Check the continuity of the coil; if it isn't working, your scissor lift could be experiencing a problem with its solenoid.
How do you lower a scissor lift?
- 1 Check for any obstructions.
- 2 Turn Key Switch fully clockwise to “base” position and hold.
- 3 Pull out or twist Emergency Stop.
- 4 Operate and hold Function Switch in downwards position.
- 5 Lower the platform until it is 7 ft (2.1m) from the ground and then stop.
How do you calibrate a Skyjack tilt sensor?
To calibrate the tilt switch, first make sure the machine frame is level. Once the frame is level, you can set the tilt switch to match. For the type of tilt switch in Figure 1, adjust the nylon lock nuts on the tilt switch base to place the bubble in the center circle.
How do you troubleshoot a scissor lift?
https://www.youtube.com/watch?v=Fwz1udgKNIo
How do you lower a stuck scissor lift?
https://www.youtube.com/watch?v=kkbDQCa28MA
How do you move a JLG Lift?
https://www.youtube.com/watch?v=jQSm3HJt9Ak
How do you transport a boom lift?
Nylon straps should be placed parallel to the machine's strap guides, taking care that you don't use too much downward force to secure them. Put some sort of force-absorbing material, such as foam, rubber or wood, opposite the nylon strap to reduce any movement of the straps during transport.Sep 16, 2021