How do you run a diagnostic test on a Maytag Neptune washer?
How do you run a diagnostic test on a Maytag Neptune washer?
- Plug the washer in for power.
- Put the washer into "Service Mode" by holding the "Delicates" and "Heavy soil" keys simultaneously for 3 or more seconds. ...
- Pushed "Presoak" to put it in diagnostic code mode.
How do I reset my Maytag Neptune washer?
- Turn off and unplug the washer. Wait 30 seconds.
- Reconnect it and press the "Power" button. This resets the unit.
- Continue regular use of the washer.
Where is the reset button on Maytag Neptune washer?
- Locate the "Off" button, located to the right of the Neptune's "Start/Pause" button. ...
- Press the "Off" button within the first 30-seconds of beginning the cycle to cancel the current cycle.
How do I reset my Maytag washer?
- Press the "Power/Cancel" button. ...
- Push the appropriate button to choose a new cycle.
- Press "Start/Pause." You have now reset your Maytag washer.
How do I reset my Maytag washer to factory settings?
- Unplug the washer for 1 minute from the electrical outlet.
- Plug the washer back in and lift and lower the lid 6 times within a 12 second period. You have 30 seconds to start lifting and lowering the lid. ...
- The motor has now been reset and is ready for you to start a cycle.
How do I troubleshoot my Maytag Neptune washer?
Check the plug to be sure the washer is plugged in. Check the circuit breaker or fuse box. Clean the filtering screens in the hoses to remove any debris. Turn the control knob to select a cycle, and push "Start/Stop." Call Maytag's customer service line if your washer still won't run.17 jul 2017
Is there a reset button on Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.29 abr 2021
Where is the fuse on a Maytag Neptune washer?
Maytag washers have a fuse in the lid-switch assembly. Maytag top-loading washers have a fuse in the lid-switch assembly. When you close the lid after adding the laundry and soap, the lid's plastic switch contacts with the assembly underneath.
How do you run a diagnostic test on a Maytag front load washer?