Using a flat-edged trowel, apply the floor leveling compound. Fill in all dips and uneven spots in the subfloor. Allow the leveler to dry as is instructed by the manufacturer's product label. Remove hills or humps using a floor sander until the entire floor is level.Aug 3, 2021
Can you use self-leveling compound on wood subfloor?
If you've got a plywood subfloor, like many buildings do, you can leave it in place and apply self-leveling concrete directly on top of it. Once the plywood subfloor is covered, just apply the finish you want to achieve the desired look.Jul 14, 2020
Can you use Mapei self leveler on plywood?
Self-Leveler Plus is a high-strength, regular-setting, cement-based, self-leveling underlayment, for use over interior concrete, plywood and other approved floor surfaces. ... Once cured, it provides a smooth, level surface on which to install a variety of floor coverings.
How do you level a wood subfloor?
A wood subfloor is easy to level by either sanding off the high spots or adding compounds designed to build up the low spots. Most flooring manufacturers allow a slight variance for their product, so you may not need to do much work to get the floors ready. Check with the flooring product for specific tolerances.
How do you shim an uneven subfloor?
- Fill up slight low spots with wood shims. ...
- Screw the wood shims into place on top of the joists with a drill and screws to bring the low spots up to the same height as the high spots for an even installation area for the subfloor material. ...
- Plane down slight high points of joists with the planer.
What can I use for subfloor leveling?
Use Self-Leveling Compound to Correct Subfloor Wide sags and depressions in a floor sometimes can't be adequately bridged even by sheets of plywood, so it's best to fill these areas with self-leveling compound. When mixed with water, the compound settles into low areas and dries to a smooth, level surface.Aug 14, 2021