Using the provided screws and anchors, mount your solar charger to the exterior wall. Connect the micro-USB cable to the charging port on the back of your Ring Video DoorbellRing Video DoorbellThe motion sensors in your Ring Video Doorbell are designed to detect motion up to 155 degrees horizontally and from five to 25 feet outward from the fixture. They're also more sensitive to horizontal movement across the detection area than vertical.https://support.ring.com › en-us › articles › 360040763812-PrProper Positioning for your Ring Video Doorbell (2020 release). Attach your Ring Video Doorbell to your Solar Charger. Tighten the security screws on the bottom of your Ring Video Doorbell.
How long does it take to charge Ring battery with solar panel?
about five hours
Does Ring solar charger need direct sunlight?
Ring solar power devices require three to four hours of direct sunlight a day. If your installation area is frequently very cloudy or gets a lot of rain or snow, this could limit the amount of sunlight that your solar power device receives. Note: The solar charger or solar panel requires direct sunlight.
Does the Ring solar charger work?
Yes. The Solar Charger should give you reliable service through most weather conditions. I live in an area that gets mostly cloudy, rainy days. The Solar Charger requires a certain amount of direct sunlight in order to power the Ring Video Doorbell 2.
Why is my Ring solar panel not charging?
If you have any problem with your Ring devices not charging through a solar panel, the first thing you must do is to detach the wire. Check for debris or blockages inside the wire plug. Once you are check for both the issues, reattached the solar panel with the device. Check if the problem persists!
How do you test solar charging?
You can measure the panel's voltage by touching the probes to the ends of the panel's bare wires. Be sure to do this test during the day at a time when the solar panel is not covered or in the shade. With the red probe touching the red wire, and the black probe touching the black wire, measure the voltage.
How do I know if my Ring solar is charging?
As soon as you plug it into the Ring Video Doorbell it starts working (but only provides power when receiving direct sunlight). Once the Solar Charger starts working, does that show up in the Ring App? No. The Device Health page for your Ring Video Doorbell will continue to show that the power source is a battery.
How do I reconnect my solar Ring?
- Remove the two rubber spacers behind the screws.
- Plug in your Solar Panel.
- Secure the plug with the screws you removed.
Why is my ring solar panel not working?
If you have any problem with your Ring devices not charging through a solar panel, the first thing you must do is to detach the wire. Check for debris or blockages inside the wire plug. What is this? If you find no debris or blockage, check if there are any issue with the wires.
How do I know if my Ring solar charger is working?
Your solar charger or solar panel will only show as connected in the Ring app while it has stored power. Should the device be out of the sun long enough to completely run out of power, it will show up as “Not Connected” in the Ring app.